SmartGen

Product descriptions from the supplier HAT530P/HAT530PC series dual power ATS controller consists of microprocessor as the core, can precisely detect voltage (2-way 3-phase/single phase), make accurate judgement on abnormal voltage (power lost, over/under voltage, over/under frequency, loss of phase, reverse phase sequence) and control ATS to transfer after the delay has expired. The controller is applicable for two-stage ATS and three-stage ATS with controlling the start of

Product descriptions from the supplier The powerful Microprocessor contained within the HAT530N ATS controller allows for precision voltage (2-way 3-phase/single phase) measuring and make accurate judgment on abnormal voltage (power lost, over/under voltage, over/under frequency, loss of phase, phase sequence wrong) and control ATS to transfer after the delay has expired. This controller is suitable for NO Breaking ATS and ONE Breaking ATS. When #1 power is abnormal, the

Product descriptions from the supplier HAT520N Dual Power ATS Controller is made by the core of the microprocessor, which can precisely detect 2-way 3-phase voltages, 2-way single phase voltages and make accurate judgment for the occurred abnormal voltages (lost of power, over voltage, under voltage, over frequency, under frequency, loss of phase, reverse phase sequence), controlling ATS switchover after delay. It is suitable for controlling No Breaking ATS, and it has the

Product descriptions from the supplier HAT160 ATS Controller is suitable for CB ATS of single motor with different capacities. It can accurately detect 2-way voltages of 3-phase 4-wire/single-phase 2-wire and make accurate judgment for occurred voltage abnormal situations (such as over voltage, under voltage, over frequency, under frequency and loss of phase), then control ATS transfer after delay. When ATS switch gets abnormal, controller can detect close/open failure and

Product descriptions from the supplier TheFPC2000DieselFire Pump Controlleris used for starting or controlling thedieselfire pumps.Itprovides manual and automatic start/stop function. Theautomatic startfunctioncanbe controlled bypressure sensor or remote automation device (such asdeluge valve), and themanual startfunctioncanbe controlled bycontrollerstart button orremote manual button. The controllersupportsalarm recording and timedrecording functions, which can monitor

Product descriptions from the supplier FPC1700 Jockey Pump Controller is composed of a microprocessor as the core, which can be started/stopped according to the pipe pressure, stabilize the pipe pressure in the setting range and detect the grid voltage to protect the abnormal voltage, realizing the automation and intelligent control of the controller. It integrates LCD display and with good HMI function. FPC1700 fire pressure stabilizing pump controller can start or stop the

Product descriptions from the supplier TheFPC1000M Electric Fire Pump Controlleris used for starting or controlling the fire pumpsdriven by motors. It can manually start the fire pump through the local start button or automaticallystart the fire pump by detecting the pressure drop of the automatic fire sprinkler system. The controlleris equipped with a pressure sensor. The fire pump can be manually stopped through the local stopbutton or automatically stopped after the timer

Product descriptions from the supplier FPC915Diesel Driven Fire Pump Controlleris designed for fire pump systems whichcontrolled byengine.It allows automatic start/stop, data measurement, alarm protection functions. CANBUS (SAE J1939) interface enables the controller to communicate with various engine which fitted with J1939 interface. FPC915Diesel Driven Fire Pump Controllerfit with LCD display, optional languagesinterface(including English, Chinese or other languages)

Product descriptions from the supplier FPC615 Fire Pump Controller designed for controlling of fire pump unit. It fits with auto/manualmodetransfer function, which can start unit automatically via remote input signals in auto mode as wellas manual start unit via pressing start key on the front panel of the controller. It is able tomonitorvoltage status of two battery packs andsimultaneouscollect sensor and digital signals of the unit tomonitor genset running status. Moreover,

Product descriptions from the supplier EP4301 Engine Controller is used for the control or data display of engines to realize start/stop, speed control, data measurement and alarm display of the engine. It fits with colour LCD display, optional Chinese, English and French, which is reliable and easy to use. EP4301 Engine Controller applies 32-bit microprocessor technology, realizing precise measuring of many parameters, value adjusting and threshold setting etc. functions. A

Product descriptions from the supplier EP4300 Engine Controller is used for the control or data display (CAN instrument) of engines, especially for the electric-controlled engines to realize start/stop, speed control, data measurement, and alarm display of the engine. It fits with colour LCD display, optional Chinese and English, which is reliable and easy to use. EP4300 Engine Controller applies 32-bit microprocessor technology, realizing precise measuring of many parameters

Product descriptions from the supplier BACM2420A battery charger is an intelligent and multi-function charger, which is specially designed to meet the charging characteristics of the lead-acid, lithium and nickel-cadmium engine starter batteries. This charger is suitable for 24V or 12V battery packs, with a maximum output current up to 20A. Additionally, it can be used as a DC power supply, providing stable power for DC24V or DC12V equipment. Three-stage charging method is

Product descriptions from the supplier ACC1700/ACC1700CAN Diesel Air Compressor Controller is used for air compressor with diesel-driven engine to realize air compressor start/stop, data measurement, maintenance, alarm protection and Three Remotes. ACC1700CAN controller has speed regulator function, and CANBUS (SAE J1939) port, which can control various ECU diesel air compressors. ACC1700/ACC1700CAN Diesel Air Compressor Controller adopts 32-bit micro-processor technology,

Product descriptions from the supplier ACC4100 Diesel Air Compressor Controller is used for air compressor with diesel-driven engine in order to realize air compressor start/stop, data measurement, maintenance, alarm protection and three remotes. It has speed regulator function, and CANBUS (SAE J1939) port, which can control various ECU or non-ECU diesel air compressors. ACC4100 Diesel Air Compressor Controller applies 32-bit ARM micro-processor technology, which can realize

Product descriptions from the supplier ACC5100Diesel Air Compressor Controllerisusedfor aircompressorwith dieseldriven engineinorder to realizeaircompressor start/stop, data measurement, maintenance, alarm protection and Three Remotes. It has speed regulator function, and CANBUS (SAE J1939) port, which can controlvarious ECU or nonECUdiesel air compressors. ACC5100Diesel Air Compressor Controllerapplies 32bit microprocessor technology, which canrealize functions of precise

Product descriptions from the supplier ACC7100A Diesel Air Compressor Controller is used for air compressor with diesel-driven engine in order to realize functions of compressor start/stop, data measurement, maintenance, alarm protection and three remotes. It has speed regulator function, and CANBUS (SAE J1939) port, which can control various ECU or non-ECU diesel-driven air compressors. It also applies heated liquid crystal and electronic components resistant to high and low

Product descriptions from the supplier ACC7200Diesel Air Compressor Controllerisusedfor air compressorwith dieseldriven engineinorder to realize functions ofcompressor start/stop, data measurement, maintenance, alarm protectionand three remotes. It has speed regulator function, and CANBUS (SAE J1939) port, which can controlvarious ECU or nonECUdieseldriven air compressors. ACC7200DieselAir Compressor Controllerapplies 32bit ARM microprocessor technology, whichcan realize

Product descriptions from the supplier ALC700 series controllers are used for automation and monitor control systems of single light tower unit to achieve scheduled start/stop, sunrise and sunset start/stop, SMS message remote start/stop as well as start/stop genset via remote input port. ALC700 series controllers can be used for turning on and off the beacons of the light tower in proper order and is compatible with both AC and DC light tower sets. The modules are digital,

Product descriptions from the supplier ALC700 series controllers are used for automation and monitor control systems of single light tower unit to achieve scheduled start/stop, sunrise and sunset start/stop, SMS message remote start/stop as well as start/stop genset via remote input port. ALC700 series controllers can be used for turning on and off the beacons of the light tower in proper order and is compatible with both AC and DC light tower sets. The modules are digital,

Product descriptions from the supplier ALC736/ALC736-4G Hybrid Energy Lighting Tower Controller is used for automation control systems of single lighting tower unit to achieve not only scheduled/remote/SMS/light sensor/sunrise/sunset light on/light off, as well as light sensor + scheduled light on/light off, light sensor + sunrise/sunset light on/light off functions. Four configurations of PV + BMS + Gen/Mains, PV + BMS, Gen/Mains + BMS, and Gen/Mains are supported to apply