Rectangular Connectors

Product SpecificationsThis document outlines the specifications for the SH10000 series of products. Key attributes include material compliance with UL94V-0 and requirements for a smooth, clean plastic surface free from defects.MaterialPAB6 UL94V-0Surface FinishPlastic surface smooth and clean, no obvious burrs, bubbles, distortion, gate strain, lack of material and other undesirable phenomena.ModelCpkCpk and SControl ItemREFEEF CRH) BRLFLXKNE0.10PAGESH1. 05 -nPinSH10000-2Y1

Product OverviewProduct Name: 8821WR-XXDPModel Name: MikeyDescription: New Rev. AManufacturer: HanElectricity Co.,LTDApplication: This product is designed for electrical connections and is suitable for various applications requiring reliable voltage and current ratings.BrandHanElectricityOriginChinaMaterial (Housing)Nylon UL94V-0Material (Terminal)BrassPlatingTin PlatedCertificationsUL94V-0Mate with Housing8821H-D SeriesCircuitsDimension A (mm)Dimension B (mm)Dimension C (mm

This product is a wafer terminal connector designed for PCB applications. It offers a reliable and efficient solution for wire-to-board connections. Key Features: Available in configurations from 2 to 20 poles. Accommodates a wide wire range (AWG 32#~28#). Suitable for PCB thicknesses from 0.6mm to 1.2mm. High insulation resistance and dielectric withstanding capabilities. Low contact resistance for efficient signal transmission. Wide operating temperature range. Application

Product OverviewThis product is a wafer connector designed for various electronic applications. It offers reliable connections with a focus on durability and performance.BrandYuandi Electronics Co,LtdModel SeriesWAFER-HY2.0Housing MaterialLCP Off WhiteSoldering Lug MaterialBrass Plating SnTerminal MaterialBrass Plating SnModel No.A (mm)B (mm)C (mm)WAFERHY2.0-2PWT-W12.00 [7.90]4.80WAFERHY2.0-3PWT-W14.00 [9.90]6.80WAFER-HY2.0-4PWT-W15.00 [11.90]8.80WAFERHY2.0-5PWT-W18.00 [13.90

Product Overview This product is part of the 2016HM Series, designed for reliable electrical connections. It features a durable Nylon UL94V-0 housing and Brass Tin Plated terminals, ensuring good conductivity and flame retardancy. Suitable for PCB mounting with a recommended thickness of 1.2mm to 1.6mm. Key Features & Applications Material: PA66 (UL94V-0) Housing, Brass Tin Plated Terminals Operating Temperature: -25 to 85 Rated Voltage: 250V AC/DC Rated Current: 1A

Product OverviewThis document details the specifications for the 2005WR-XXP part, also referred to as PA6T R1. Designed and checked by Tom and Jerry, this component is part of a larger drawing (FILE.NO. 3RD ANGLE PROJ) with a scale of 3:1. A revision A is noted with a scale of 1/2, dated 2015/5/3.Product AttributesBrand: HanElectricity Co.,LTDModel Name: 2005WR-XXPPart Name: PA6T R1Technical SpecificationsModelDimension 1 (mm)Dimension 2 (mm)Dimension 3 (mm)Revision2005WR

Product OverviewThe DF11 Series is a 2.0mm pitch, double-row connector designed for high-reliability board-to-wire applications. It is UL/CSA compliant and suitable for diverse industries including medical, automotive, and infrastructure. The series supports various crimping configurations and requires specific handling procedures to maintain performance reliability.Brand: HIROSE ELECTRICPitch: 2.0mmConfiguration: Double-RowCertifications: UL (E52653), CSA (LR95109)Operating

Product SpecificationsMaterial: PA66 UL94V-0Current rating: 3.0A AC,DCVoltage rating: 250V AC,DCTemperature range: -25C to +85CContact resistance:

Product OverviewThis product is a registered trademark, indicating a branded item of quality and authenticity. Further details regarding its function, usage, advantages, and application scenarios are not provided in the input text.Product AttributesBrand: Technical SpecificationsAttributeValueRegistered Trademark

MX1.25ZX-MX1.25-9PJKMX1.25ZX-MX1.25-9PJK9 Pin (Housing)

Product Overview This product is a wafer connector designed for wire-to-board applications. It offers a reliable connection solution with various pin configurations and wire ranges. Brand Yuandi Electronics Co.,Ltd Material Brass (Terminal), LCP (Housing) Color Off White (Housing) Plating Sn (Soldering lug, Terminal) Model No. Pins A (mm) C (mm) WAFER-ZH1.5-2PLT-W1 2 1.50 3.65 WAFER-ZH1.5-3PLT-W1 3 3.00 5.15 WAFER-ZH1.5-4PLT-W1 4 4.50 6.65 WAFER-ZH1.5-5PLT-W1 5 6.00 8.15

Product OverviewThe 1502WR-XXP is a housing designed for electronic applications, suitable for use with terminals. It is constructed from PA66 material with UL94V-0 flammability rating and is available in natural or black color. The housing is designed to accommodate PCB thicknesses from 1.2mm to 1.6mm and operates within a temperature range of -25 to 85.Product AttributesBrand: HanElectricity Co.,LTDOrigin: Not specifiedMaterial (Housing): PA66 (UL94V-0)Color (Housing):

This section appears to be a product specification table and a list of general specifications for electronic components, likely connectors or similar parts. The primary function and application scenarios are not explicitly detailed in this snippet, but the technical specifications suggest use in electronic circuits requiring specific voltage, current, and insulation ratings. General Tolerance DImA0.20 General Tolerance DImB0.25 General Tolerance 8.300.25 General Tolerance 7

Product Overview This product is a series of wafer connectors designed for electrical connections. They are suitable for applications requiring reliable wire termination and connection to PC boards. Specifications Poles/No. of Contacts: 2 to 20 Wire Range: AWG 28 to 22 Applicable PC Board Thickness: 1.6mm Current Rating: 3.0A Voltage Rating: 250V DC/AC Insulation Resistance: 1000M Min Dielectric Withstanding: 1000V AC/minute Contact Resistance: 20m Max Operating Temperature:

Product OverviewThis section details the technical specifications and recommended PCB layout for a connector product.Insulator MaterialPolyester (CL91V-0)Contact MaterialPhosphor bronzeContact PlatingGold FlashStandardPAGTPCB Tolerance0.05 (Top View)SpecificationValueUnitCurrent Rating0.75AmpsWithstanding Voltage500AC VInsulation Resistance1000M MinContact Resistance20m MaxOperation Temperature-40 to +105Max. Processing Temp240 (for 30-60 seconds) / 260 (for 5 seconds) C

Product OverviewThis specification applies to the PH series connector strip, covering product performance, test methods, and inspection requirements. It is designed for electrical connectivity with specific environmental and mechanical tolerances.Product AttributesBrand: HCTLDZ ()Origin: Shenzhen, ChinaCertifications: UL94V-O (for Nylon66/LCP)Applicable Wire Sizes: AWG #2228Applicable PC Board Thickness: 1.6mmTechnical SpecificationsItemPart No.TypeMaterialFinishColorSpecific

Product Overview This product is a 4-cavity, keyed connector designed for use with AT04-4P* series connectors, where '*' denotes modifications and/or colors. It is RoHS compliant and made from thermoplastic material. Brand Amphenol Sine Systems Material Thermoplastic Certifications RoHS Compliant Cavities 4 Compatibility Use with connectors AT04-4P* (* = Modifications and/or Colors) Part Number Description Item Quantity Color Keying AT04-2P-P012 P-WEDGELOCK, 2 POS, KEYED, AT

Product Specifications This document outlines the technical specifications for the ARTAJG and EWr4fGE series components. Insulator Material Polyester (UL94V-0) Contact Material Phosphor bronze Contact Plating Gold Flash Standard PABT Specification Value Current Rating 1.0 Amps Withstanding Voltage AC 500V Insulation Resistance 1000M Min Contact Resistance 20m Max Operation Temperature -40 to +105 Max. Processing Temp 240 C for 30-60 seconds (260 C for 5 seconds)

Product Overview This section details the specifications for the ARTAJG and EWf4fGE product types. Key attributes include current rating, voltage withstanding, insulation resistance, contact resistance, operating temperature, insulator material, contact material, and contact plating. Insulator Material Polyester (UL94V-0) Contact Material Phosphor bronze Contact Plating Gold Flash Standard PABT Max. Processing Temp 240 C for 30-60 seconds (260 C for 5 seconds) Specification

Product Overview The WAFER-GH1.25 series connectors are designed for reliable electrical connections in various applications. They are suitable for use with PC boards and offer a wire range of AWG 32#--28# and applicable PC board thickness from 0.6mm to 12mm. Brand Yuandi Electronics Co.,Ltd Model Series WAFER-GH1.25 Housing Material LCP Off White Plating Sn Model No. Poles A (mm) B (mm) C (mm) D (mm) WAFER-GH1.25-2PWT-W1 2 1.25 3.85 5.80 1.00 WAFER-GH1.25-3PWT-W1 3 2.50 5.10