Industrial HDG Steel Sheet Coil with 508 / 610mm Coil ID, 195–420 MPa Yield Strength, and 0.09–3.8mm Thickness

1. Product Overview

Hot dipped galvanized steel coil is supplied as a zinc-coated base material for sheet processing, roll forming, and structural fabrication. The zinc layer formed during continuous hot-dip galvanizing helps improve corrosion resistance in storage, transport, and service environments.

The thickness range of 0.09–3.8 mm allows the coil to cover both light-gauge applications and medium-duty fabrication requirements. Standard coil IDs of 508 mm and 610 mm are compatible with common industrial decoiling and slitting equipment, which helps simplify downstream production.

2. Technical Solution

Product performance is based on the following technical characteristics:

• Continuous hot-dip galvanizing with controlled coating weight
• Zinc layer providing barrier protection and sacrificial protection
• Balanced strength and elongation for forming and structural use
• Standard coil dimensions for processing line compatibility

Yield strength of 195–420 MPa supports dimensional stability and load-bearing use, while tensile strength of 270–500 MPa improves resistance to deformation during fabrication. Elongation of 12–25% helps the material adapt to bending, stamping, and profiling operations.

3. Specifications

4. Application

• Sheet metal fabrication
• Roofing and wall cladding systems
• Structural steel components
• Electrical cabinets and enclosures
• HVAC ducts and ventilation parts
• Appliance panels and fabricated housings

5. Processing

• Slitting into narrow strips
• Cut-to-length sheet production
• Roll forming and bending
• Stamping and drawing
• Surface coating or painting

6. Advantages

• Standard coil ID suitable for mainstream processing equipment
• Wide thickness range for multiple fabrication requirements
• Controlled mechanical properties for forming and structural use
• Z60–Z275 coating range for different corrosion environments
• Multiple surface treatments for storage and downstream processing

7. How to Choose

• Structural fabrication → select higher yield strength grade
• Outdoor service → select higher coating such as Z200–Z275
• Forming-intensive use → prioritize elongation around or above 18%
• Storage before processing → oiled or chromated surface is commonly selected
• Production line matching → confirm coil ID and coil weight with equipment capacity

8. FAQ

Q1: Can this coil be used for sheet production?
Yes, it is commonly processed into cut-to-length sheets or slit strips for fabrication use.

Q2: Why are 508 mm and 610 mm coil IDs important?
These are standard coil sizes used by most industrial decoiling and slitting lines, which helps improve equipment compatibility.

Q3: What coating level is suitable for outdoor applications?
Higher coating levels such as Z200–Z275 are generally selected for better corrosion resistance.

Q4: Is this material suitable for bending and forming?
Yes, elongation of 12–25% supports bending, stamping, and roll forming operations.

Q5: Which surface treatment is suitable for storage and transport?
Oiled or chromated surfaces are commonly used to reduce oxidation during storage and shipment.