1000–1250mm Width Hot Dipped Galvanized Steel Coil Z60–Z275 with 195–420 MPa Yield Strength for Structural and Manufacturing Use

1000–1250mm Width Hot Dipped Galvanized Steel Coil Z60–Z275 with 195–420 MPa Yield Strength for Structural and Manufacturing Use

1. Product Overview

Hot dipped galvanized steel coils are produced by immersing cleaned steel substrate into molten zinc, forming a metallurgically bonded coating. This process provides stable corrosion resistance and consistent surface quality, suitable for structural parts and downstream sheet fabrication.

The width range of 1000–1250 mm aligns with mainstream slitting and forming equipment, improving processing efficiency for manufacturing and construction applications.

2. Technical Solution

Product performance is determined by:

• Hot dip galvanizing with controlled coating weight (Z60–Z275)
• Zinc acting as barrier and sacrificial protection
• Balanced mechanical properties for forming and structural use
• Uniform coating thickness for stable processing

Yield strength 195–420 MPa supports load-bearing applications, while tensile strength 270–500 MPa ensures resistance to deformation during fabrication and service.

3. Specifications

4. Application

• Structural components
• Roofing and wall panels
• Automotive parts and assemblies
• Electrical cabinets and enclosures
• Appliance panels
• General fabrication and sheet metal processing

5. Processing

• Slitting into strips
• Cut-to-length sheet production
• Roll forming
• Bending and stamping
• Welding and assembly

6. Advantages

• Standard width suitable for mainstream production lines
• Adjustable zinc coating for different environments
• Stable mechanical properties for forming and structural use
• Multiple surface treatments for storage and further processing
• Coil supply improves material utilization and efficiency

7. How to Choose

• Structural use → select higher yield strength grade
• Outdoor environment → choose higher zinc coating (Z200–Z275)
• Forming applications → prioritize elongation performance
• Painting or coating → choose chromated or clean surface
• Continuous processing → match coil ID and weight to equipment

8. FAQ

Q1: What coating level should be used for outdoor applications?
Higher zinc coating such as Z200–Z275 is generally used for improved corrosion resistance.

Q2: Can the coils be processed into sheets?
Yes, coils are commonly slit or cut into sheets depending on application.

Q3: What surface treatment is suitable for storage?
Oiled or chromated surfaces are typically used to reduce oxidation during storage and transport.

Q4: Is the material suitable for forming operations?
Yes, elongation 12–25% supports bending, stamping, and roll forming processes.

Q5: What coil sizes are compatible with standard equipment?
Coil IDs of 508 mm and 610 mm are compatible with most industrial processing lines.