3–8MT Coil Weight Hot Dip Galvanized Steel Coil with 0.09–3.8mm Thickness and 40–450g/m² Zinc Coating for Construction Applications
3–8MT Coil Weight Hot Dip Galvanized Steel Coil with 0.09–3.8mm Thickness and 40–450g/m² Zinc Coating for Construction Applications
1. Product Overview
Hot dip galvanized steel coils are produced through a continuous galvanizing process, forming a metallurgical bonded zinc coating layer on cold rolled steel substrate.
The coils are supplied for further processing into sheets, strips, or formed components, and are widely used in construction, fabrication, and manufacturing industries requiring corrosion resistance and forming performance.
2. Technical Solution
Performance is determined by:
- Zinc coating mass (40–450 g/m²) controlling corrosion resistance level
- Steel substrate grade affecting mechanical strength and forming
- Surface treatment improving storage stability and paint adhesion
- Coil-based supply enabling flexible downstream processing
3. Specifications
|
Parameter |
Value |
|---|---|
|
Thickness |
0.09–3.8 mm |
|
Width |
1000–1250 mm |
|
Zinc Coating |
40–450 g/m² |
|
Yield Strength |
195–420 MPa |
|
Tensile Strength |
270–500 MPa |
|
Elongation |
12–25% |
|
Coil Weight |
3–8 MT |
|
Coil ID |
508 / 610 mm |
|
Surface |
Chromated / Oiled / Bright / Dry |
4. Application
- Construction roofing and wall systems
- Structural light steel components
- Automotive panels and reinforcements
- Appliance housing and enclosures
- General fabrication and industrial equipment
5. Processing
- Cut-to-length sheet production
- Slitting into strip
- Roll forming
- Stamping and bending
6. Advantages
- Wide thickness coverage from thin gauge to structural range
- Flexible coating selection for different environments
- Stable elongation (12–25%) suitable for forming processes
- Standard coil supply improves production efficiency
7. How to Choose
- Indoor fabrication → Z60–Z120
- Outdoor construction → Z120–Z275
- Harsh corrosion environment → ≥Z275
- Forming requirement → higher elongation grade
- Painting or coating → chromated / anti-fingerprint
8. FAQ
Q1: Why is thickness specified as 0.09–3.8mm instead of 0.2–3.0mm?
This reflects full production capability of galvanized coils and ensures consistency between coil supply and sheet processing.
Q2: What determines the service life of galvanized steel coils?
Primarily zinc coating weight. Higher coating (e.g. Z275 or above) provides longer corrosion protection.
Q3: Can coils be directly used as sheets?
No. Sheets are produced by cutting coils through cut-to-length or slitting processes.
Q4: How to choose between different surface treatments?
Oiled → short-term protection
Chromated → corrosion resistance
Bright → appearance
Dry → immediate processing
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.