Q195 Q215 Q235 ID 706mm Hot Rolled Steel Coils / Coil Hot Rolled Coil

Q195 Q215 Q235 ID 706mm Hot Rolled Steel Coils / Coil Hot Rolled Coil

1．Product Overview

Hot rolled steel coil is used where medium to heavy gauge steel is required for further cutting, forming, welding, and fabrication. This size range is suitable for structural parts, general plate conversion, and industrial steel processing where wider coil widths and thicker gauges are needed.

2．Technical Solution

The product is supplied as hot rolled steel coil with thickness from 0.8mm to 16.0mm and widths from 1000mm to 1800mm. Coil IDs of 508mm, 610mm, and 762mm allow the material to match different decoiling and processing lines. The grade range covers Q235, Q345, A36, SPHC, SPHD, SS400, S235JR, S355JR, ST37.2, and ST52.3 for different structural and fabrication requirements.

3．Specifications

4．Application

• This material is suitable for structural fabrication and general industrial steel processing.
• It can be used for cut-to-length production, welded fabrication, bending, forming, and plate conversion according to the downstream route.
• The available thickness and width range make it suitable for medium and heavy hot rolled coil applications rather than narrow strip processing.

5．Processing

• The coil can be supplied for decoiling and cut-to-length production.
• It is suitable for bending, forming, welded fabrication, and general structural processing.
• Thickness and width should be selected according to the final part geometry, fabrication route, and equipment capacity.

6．Advantages

• The 0.8–16.0mm thickness range covers a broad hot rolled coil processing range.
• The width range of 1000mm to 1800mm matches mainstream hot rolled coil applications.
• Three coil ID options support different line requirements.
• The available grade system covers GB, ASTM, JIS, EN, and DIN style equivalents for broader project matching.

7．How to Choose

• Choose Q235 or SS400 for general structural and commercial processing.
• Choose Q345 or S355JR when higher strength level is required.
• Choose A36 when the project follows ASTM structural steel routing.
• Choose width according to blank layout and downstream processing efficiency.
• Choose thickness according to final part rigidity, forming route, and fabrication requirement.

8．FAQ

Q1．What is the thickness range of this hot rolled steel coil
The thickness range is 0.8–16.0mm.

Q2．What is the width range
The width range is 1000mm, 1220mm, 1250mm, 1500mm, and 1800mm.

Q3．What coil IDs are available
The available coil IDs are 508mm, 610mm, and 762mm.

Q4．What grades are available
Available grades include Q235, Q345, A36, SPHC, SPHD, SS400, S235JR, S355JR, ST37.2, and ST52.3.

Q5．What is the MOQ
The MOQ is 50MT per size.