Soft Commercial, Full Hard, Deep Drawing SPCC SPCD SPCE Cold Rolled Steel Coils / Sheet

1．Product Overview

Cold rolled steel sheet is used where controlled thickness, stable width, and flat sheet condition are required for downstream blanking, bending, forming, and general fabrication. This product range covers SPCC, SPCD, SPCE, DC01, DC02, DC03, DC04, SAE1006, and SAE1008, and is suitable for general commercial use as well as drawing-related processing through grade selection.

2．Technical Solution

The material is supplied under JIS G3141, EN10130, DIN1623, GB/T 700, and SAE systems, which allows matching to different market and processing requirements. In practical use, grade selection is the main basis for distinguishing general commercial quality from forming and drawing-related applications. Coil ID of 508mm or 610mm and maximum coil weight of 11 MT are suitable for common decoiling, leveling, slitting, and cut-to-length lines.

3．Specifications

4．Application

• This material is suitable for cold rolled sheet processing where stable dimensions and controlled surface condition are required.
• It can be used for blanking, bending, forming, and general fabricated sheet parts.
• According to grade selection, it is also suitable for drawing-related applications where better formability is required.

5．Processing

• The material can be supplied in coil form and cut to required sheet length.
• It is suitable for decoiling, leveling, cut-to-length production, slitting, bending, and general forming.
• For general commercial processing, SPCC or DC01 are commonly selected.
• For forming and drawing-related use, SPCD, SPCE, DC03, or DC04 are more suitable choices.

6．Advantages

• The 0.15–3.0mm thickness range covers light to medium cold rolled sheet processing requirements.
• The width range of 750–1010mm, 1220mm, and 1250mm matches mainstream sheet and coil processing lines.
• Multiple equivalent grade systems are available, which helps match different technical and market requirements.
• The material can be supplied in coil form and converted to required sheet length according to downstream processing needs.
• Coil ID of 508mm or 610mm and maximum coil weight of 11 MT support standard industrial handling and processing.

7．How to Choose

• Choose SPCC or DC01 for general commercial cold rolled sheet applications.
• Choose SPCD, SPCE, DC03, or DC04 when better forming or drawing performance is required.
• Choose thickness according to final part rigidity and forming route.
• Choose width according to blank layout, production efficiency, and downstream line requirement.
• Choose coil supply or cut sheet supply according to the actual processing route.

8．FAQ

Q1．What is the thickness range of this cold rolled steel sheet
The thickness range is 0.15–3.0mm.

Q2．What is the width range
The width range is 750–1010mm, 1220mm, and 1250mm.

Q3．What is the coil ID
The coil ID is 508mm or 610mm.

Q4．What is the maximum coil weight
The maximum coil weight is 11 MT.

Q5．What is the MOQ
The MOQ is 50 MT per size.