610mm -762mm ID SAE 1006, SAE 1008, Hrc Coil Hot Rolled Steel Coils / Coil

1．Product Overview

Hot rolled steel coil is suitable for applications that require medium to heavy gauge steel with stable width range and standard coil build for further cutting, forming, and fabrication. This product range covers 0.8–16.0mm thickness and 1000–1800mm width, which is suitable for structural fabrication, general plate processing, and industrial steel consumption routes.

2．Technical Solution

The product is supplied as hot rolled steel coil with inside diameters of 508mm, 610mm, or 762mm. This coil build supports different decoiling and processing equipment in structural and industrial sheet handling lines. The available grade system includes Q235, Q345, A36, SPHC, SPHD, SS400, S235JR, S355JR, ST37.2, and ST52.3, allowing the material to match different market and engineering requirements.

3．Specifications

4．Application

• This material is suitable for structural fabrication and general industrial steel processing.
• It can be used for further cutting, forming, bending, welded fabrication, and plate conversion according to the downstream route.
• The available thickness and width range make it suitable for medium and heavy hot rolled coil applications rather than narrow strip use.

5．Processing

• The coil can be supplied for decoiling and plate conversion.
• It is suitable for cut-to-length production, forming, bending, welded fabrication, and general structural processing.
• Thickness and width should be selected together according to the final part geometry, fabrication route, and equipment capacity.

6．Advantages

• The 0.8–16.0mm thickness range covers a broad hot rolled coil processing range.
• The width range of 1000–1800mm matches mainstream hot rolled coil applications.
• Three coil ID options allow the material to match different line requirements.
• The available grade system covers JIS, GB, ASTM, EN, and DIN style equivalents, which helps match different technical and market requirements.

7．How to Choose

• Choose Q235 or SS400 for general structural and commercial processing.
• Choose Q345 or S355JR when higher strength level is required.
• Choose A36 when the project follows ASTM structural steel routing.
• Choose width according to blank layout and downstream processing efficiency.
• Choose thickness according to final part rigidity, forming route, and fabrication requirement.

8．FAQ

Q1．What is the thickness range of this hot rolled steel coil
The thickness range is 0.8–16.0mm.

Q2．What is the width range
The width range is 1000 / 1220 / 1250 / 1500 / 1800mm.

Q3．What coil IDs are available
The available coil IDs are 508mm, 610mm, and 762mm.

Q4．What grades are available
Available grades include Q235, Q345, A36, SPHC, SPHD, SS400, S235JR, S355JR, ST37.2, and ST52.3.

Q5．What is the MOQ
The MOQ is 50MT per size.