Full-duplex, Single-port Design 3Gmini Signal Repeaters Build-in Power Supply
Full-duplex, Single-port Design 3Gmini Signal Repeaters Build-in Power Supply
|
Features |
|
High gain, easy installation and operation. |
|
Full-duplex, single-port design, build-in power supply. |
|
Use ALC technology, adjust extent automatically |
|
LED Light Working & Signal Condition Indicators |
|
Big linear power, control intermodulation & scatteration stably |
|
Dependability stand by GB6993-86 standard |
|
Compatibility of electromagnetism according with ETS300 609-4 |
|
CE and RoHs Approved |
Specification
| Frequency range |
Uplink:1930~1990MHz Downlink 2110~2180MHz |
| Gain ( dB) | Uplink Gp≥45 Downlink Gp≥50 |
| Export power (Po) | ≥10dBm |
| Pass band ripple | ≤3dB |
| I/O impedance | 50Ω/N connector |
| Noise figure | ≤4dB |
| Transmission Delay | ≤0.5μs |
| Ambient temperature | -10℃～60℃ |
| Power supply | AC110～240V 45～55Hz |
| Size | 160 x 60 x 20 mm |
| Reliability | To the GB6993-86 standard |
|
Electromagnetic compatibility |
To the ETS300 694-4 standard
|
| Function |
a) Power supply LED denote b) Export power LED denote |
| coverage area | 50 m2 |
Technique
|
Frequency range |
Uplink:1930~1990MHz Downlink 2110~2180MHz |
|
Gain ( dB) |
Uplink Gp≥45 Downlink Gp≥50 |
|
Export power (Po) |
≥23dBm |
|
Pass band ripple |
≤3dB |
|
I/O impedance |
50Ω/N connector |
|
Noise figure |
≤4dB |
|
Transmission Delay |
≤0.5μs |
|
Ambient temperature |
-10℃～60℃ |
|
Power supply |
AC110～110V 45～55Hz |
|
Size |
160 x 60 x 20 mm |
|
Reliability |
To the GB6993-86 standard |
|
Electromagnetic compatibility |
To the ETS300 694-4 standard |
|
Function |
a) Power supply LED denote b) Export power LED denote |
|
coverage area |
50 m2 |
Installation Approaches
- Fix up outdoor antenna reception on housetop and point to signal tower.
- Connect outdoor antenna to “outdoor” port in repeater machine through cable.
- Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
- Plug power adaptor into AC power socket and finish installation.
Technique Supporting
- If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
- If can not call out, please adjust the direction of outdoor antenna.
- If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antenna have distance of 20
Accessories
SelectionOutdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.
Packing list
Main unit 1pc
Power supply 1pc
User manual 1pc
The Picture of factory
The picture of certificate
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.