Duplex LC Uniboot High Density Fiber Optic Push Pull Switch Polarity Connector Patch Cord
Application
1.Data Centers
2.Local Area Networks
3.High-Density Applications
4.Interconnects
5.Cross-connects
Features
1.Uniboot with a Single Housing
2.Unique Push-Pull Design and Function
3.Interchangeable polarity
4.Low insertion loss and added loss.
5.Height of attenuation.
6.High back loss, small volume, light weight.
7.End-face geometry and quality superior than IEC and Telcordia standards.
8.LSZH, OFNP, OFNR cable jacket.
9.Mechanical performance: IEC 61754-20 standard.
10.RoHS and REACH materials compliant.
Connector Types
| Type | Reference | Note | |
| LC | IEC 61754-20 | Single mode | UPC: Blue connectors , White boots |
| Multimode | UPC: Grey or Aqua Connectors , White boots | ||
Dimensional Diagrams
1.LC Uniboot Push-Pull (Switch Polarity) 2.0mm patchcord
Patch cord versions
|
Jumper tolerance requirement Jumper tolerance requirement |
|
| Overall length (L) (M) | length of tolerance(CM) |
| 0＜L≤20 | +10/-0 |
| 20＜L≤40 | +15/-0 |
| L＞40 | +0.5%L/-0 |
Cable Parameters
|
Fiber account |
OD(mm) |
Nominal Weight (kg/km) |
Max.tensile Strength(N) |
Max.Crush Resistance (N/100mm) |
Min.Bending Radius(mm) |
|||
| Short-term | Long-term | Short-term | Long-term | Dynamic | Static | |||
| 2 | 2.0±0.15 | 6.8 | 150 | 80 | 500 | 150 | 20D | 10D |
Optical Characteristics
| Item | Parameter | Reference | |
| Single mode | Multimode | ||
| Insertion loss | Typical value≤0.15dB ; Maximum≤0.30 |
Typical value≤0.15dB ; Maximum≤0.30
|
IEC 61300-3-34 |
| Return loss | ≥ 50dB (UPC) | ≥30dB (UPC) | IEC 61300-3-6 |
End-Face Geometry
| Item | UPC (Ref: IEC 61755-3-1) | APC (Ref: IEC 61755-3-2) |
| Radius of curvature (mm) | 7 to 25 | 5 to 12 |
| Fiber height (nm) | -100 to 100 | -100 to 100 |
| Apex offset (μm) | 0 to 50 | 0 to 50 |
| APC angle (°) | / | 8° ±0.2° |
| Key error (°) | / | 0.2° max |
End-Face Qualty (SM)
| Zone | Range (μm) | Scratches | Defects | Reference |
| A: Core | 0 to 25 | None | None | IEC 61300-3-35:2015 |
| B: Cladding | 25 to 115 | None | None | |
| C: Adhesive | 115 to 135 | None | None | |
| D: Contact | 135 to 250 | None | None | |
| E: Rest of ferrule | None | None | ||
End-Face Qualty (MM)
| Zone | Range (μm) | Scratches | Defects | Reference |
| A: Core | 0 to 65 | None | None | IEC 61300-3-35:2015 |
| B: Cladding | 65 to 115 | None | None | |
| C: Adhesive | 115 to 135 | None | None | |
| D: Contact | 135 to 250 | None | None | |
| E: Rest of ferrule | None | None | ||
Mechanical Characteristics
| Test | Conditions | Reference |
| Endurance | 500 matings | IEC 61300-2-2 |
| Vibration | Frequency: 10 to 55Hz, Amplitude: 0.75mm | IEC 61300-2-1 |
| Cable retention | 100N (patch cable); 5N (pigtail) | IEC 61300-2-4 |
| Strength of coupling mechanism | 80N for 2 to 3mm cable | IEC 61300-2-6 |
| Cable torsion | 15N for 2 to 3mm cable | IEC 61300-2-5 |
| Fall | 10 drops, 1m drop height | IEC 61300-2-12 |
| Static lateral load | 1N for 1h (patch cable); 0.2N for 5min (pigtail) | IEC 61300-2-42 |
| Cold | -25°C, 96h duration | IEC 61300-2-17 |
| Dry heat | +70°C, 96h duration | IEC 61300-2-18 |
| Change of temperature | -25°C to +70°C, 12 cycles | IEC 61300-2-22 |
| Humidity | +40°C at 93%, 96h duration | IEC 61300-2-19 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.