48V Low Voltage Protection Devices Industrial DIN RAIL Three Phase Power Supply

Price Negotiable

Price: Negotiable

MOQ: 2 sets

Delivery Time: 15 days after signing the contract

Brand: MEAN WELL

Product Description

Original SE-100-24 24V/4.5A Single Output AC to DC High-power Switching Power Supply

Features :

Three-phase AC340-550V wide range input
High efficiency 89% and low dissipation
Protection : short circuit / overload / over voltage / over temperature
Cooling by free air convection
Built-in constand current limiting circuit
Can be installed on DIN rail TS-35/7.5 or 15
UL508 ( industrial control equipment ) approved
EN61000-6-2 ( EN50082-2) indusctrial immunity level
100% full load burn-in test
Fixed switching frequency at 70KHZ
3 Years warranty

MODEL		DRT-960-48
OUTPUT	DC VOLTAGE	48V
	RATED CURRENT	20A
	CURRENT RANGE	0 ~ 20A
	RATED POWER	960W
	RIPPLE & NOISE (max.)	80mVp-p
	VOLTAGE ADJ. RANGE	48 ~ 55V
	VOLTAGE TOLERANCE	±1.0%
	LINE REGULATION	±0.5%
	LOAD REGULATION	±0.5%
	SETUP, RISE TIME	200ms, 60ms/400VAC 200ms, 60ms/500VAC at full load
	HOLD UP TIME (Typ.)	14ms/400VAC 30ms/500VAC at full load
INPUT	VOLTAGE RANGE	Three-Phase 340 ~ 550VAC (Dual phase operation possible in connecting L1,L3,FG Note.5)
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	92%
	AC CURRENT (Typ.)	2A/400VAC 1.6A/500VAC
	INRUSH CURRENT (Typ.)	COLD START 50A
	LEAKAGE CURRENT	<3.5mA / 530VAC
PROTECTION	OVERLOAD	105 ~ 125% rated output power
	OVERLOAD	Protection type : Constant current limiting, unit will shut down o/p voltage after 3 sec. , re-power on to recover
	OVER VOLTAGE	59 ~ 66V
	OVER VOLTAGE	Protection type : Shut down o/p voltage, re-power on to recover
	OVER TEMPERATURE	110°C ± 5°C (TSW1) detect on heatsink of power switch 85°C ± 5°C (TSW1) detect on heatsink of power switch
	OVER TEMPERATURE	Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP.	-20 ~ +60°C (Refer to "Derating Curve")
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +85°C , 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/°C (0 ~ 50°C)
	VIBRATION	Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY & EMC (Note 4)	SAFETY STANDARDS	U508, UL60950-1, TUV EN60950-1 approved
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC / 25°C / 70% RH
	EMC EMISSION	Compliance to EN55011 (CISPR11), EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11, EN61204-3, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
OTHERS	MTBF	122.5K hrs min. MIL-HDBK-217F (25°C )
	DIMENSION	276125.2100mm (WHD)
	PACKING	3.3Kg; 4pcs/14.2Kg/1.14CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Dual phase operation(connecting L1,L3,FG)is allowed under certain derating to output load. Please refer to the derating curves for details.