XMT XMS SERIALS STATIC MONITORING CLOSING POSITION,TRIPING POSITION,POWER-STATE RELA

1 Relay rating     
Common type(XMT):working current 4mA～6mA;working voltage 80VDC～300VDC.
(2 group contacts can be 50VDC～300VDC)High sensitivity type(XMS): working current 3mA～4.5mA;working voltage 50VDC～300VDC.(AC: working current increase 2mA)
2 Contact capacity  250VDC, 0.1A,Prohibit testing insulation and endurance voltage of contact.Contact can be applied only in signal loop.
3 Retaining value  0.7~1.2 times to rating voltage  The operating and resetting time of the JZ-7 series auxiliary relay is less than 15ms.
4 Power consumption  Type XMT: Less than 1.1W under 220VDC.Type XMS: Less than 0.9W under 220VDC.3.5 Insulation resistance  Measured with 1000V tramegger, the insulation resistance of every fetch out terminal to the shell fix-screw more than 10 MΩ.
6 Insulation and endurance voltage   The limited power frequency voltage of every
fetch out terminal to the shell fix-screw is 2000V. The limited value among the con-
tacts of the one group is 1000V. And after test for 1 minute, there is no break off.
7 Electrical endurance  250VDC, 0.1A, above 104 times.                        
8 Mechanical endurance   More than 3 million (contact with no charge).
 

XMT/XMS TYPE SERIALS STATIC MONITORING 

CLOSING POSITION,TRIPING POSITION,

POWER-STATE RELAY(JZ-7GY-S002XMT)

XMT/XMS TYPE SERIALS STATIC MONITORING 

CLOSING POSITION,TRIPING POSITION,

POWER-STATE RELAY(JZ-7GY-S020XMS)

XMT/XMS TYPE SERIALS STATIC MONITORING 

CLOSING POSITION,TRIPING POSITION,

POWER-STATE RELAY(JZ-7GY-S040XMT)

XMT TYPE SERIALS STATIC MONITORING 

CLOSING POSITION,TRIPING POSITION,

POWER-STATE RELAY(JZ-7GY-S202XMT)

XMT TYPE SERIALS STATIC MONITORING 

CLOSING POSITION,TRIPING POSITION,

POWER-STATE RELAY(JZ-7GY-S220XMT)

XMT TYPE SERIALS STATIC MONITORING 

CLOSING POSITION,TRIPING POSITION,

POWER-STATE RELAY(JZ-7J-203XMT)