Working steps:

1. System loading: A pre-loaded closed filter bag is placed into the basket.

2. Program Menu: The 'Spray Wash' or 'Agitation Wash' program is selected on the HMI where the RPM and cycle times are set to the operator’s specifications.

3. Fill: Alcohol is connected from the source tank to the centrifuge.

4. The Wash cycle: The plant material undergoes an agitated wash with a set number of bi-directional agitations

5. System Draining: When the wash cycle is complete, the outlet valve is manually opened and the liquid drained. The alcohol wash is pumped to a properly rated storage reservoir for further processing.

6. Spin Dry Cycle: The 'Spin Dry' menu is selected on the HMI and the drying cycle is started. The wet plant solids are spun dry of the remaining alcohol mixture within.

7. System Unloading: Upon completing the 'Dry cycle', the centrifuge is unloaded by removing the filter bag from the basket.

8. Repeat Process.

Introduction:

Specification:

Before leaving the factory:

Our advantage:

1. Cold temperature operation

2. high recovery rate till 90%+

3. variable capacity from 30poundsd to 200pounds per batch

4. less labor needed

5. Low power consumption

6. small loss

7. Commissioning and training

Our service:

1. 12-month guarantee period from machine arrival date.

2. Abundant spare parts in stock are available to provide.

3. Our technicians could be dispatched for overseas service.

4. 7*24 hours technical consultation.

5. Your workers could get trained both in our factory and yours.

6. Routine tracing till the machine work properly will be done timely.

7. We will remind you to do the normal maintenance.

8. Your suggestions or any comments & reflections would be prioritized.

9. Marketing team will visit you during our visit to your country if you require it.

Packaging:

The PPTD series is only used for wet materials.

In addition, the BB series is used for dry materials.