ASME SA179 AL Finned Tube Extruded Finned Tube For Heat Exchanger Tube

ASME SA179 AL Finned Tube Extruded Finned Tube For Heat Exchanger Tube

Finned Tubes Quick Details for Heat Exchangers:
Fin Type: Extruded
Outer Diameter (OD): Min 16mm ~ Max 50.8mm.
Tube length: up to 18,000 mm.
Fin height: max. 16.5mm.
Fin thickness: generally 0.4mm~0.6mm
Fin Pitch: 2.1 mm minimum (12FPI)
Surface Protection: Both exposed ends shall be galvanized or aluminized with electrospray arc system coating.
Accessories: tube support boxes, clamps or spacer boxes (materials: aluminium, zinc and stainless steel).

ASTM A179,ASME SA179 cold-drawn seamless steel tube Chemical Composition

ASTM A179,ASME SA179 cold-drawn seamless steel tube Mechanical Propertie

Additional Information
Payment method: wire transfer, letter of credit
Delivery: 15-30 days after payment
Mark: standard + steel type + size + furnace number + batch number
Packing: Iron frame packing case and desiccant are placed in each packing case for continental transportation. or as needed

We offer an impeccable range of Extruded Finned Tubes made of high quality metal which are widely used in Pharmaceutical, Chemical and Marine industries. Here, a strip of our Extruded finned tube is subjected to controlled and calculated deformation under tension. This optimizes the contact pressure of the bottom of the fins on the base tube and thus optimizes heat transfer. In addition, the fins on the feet significantly enhance the corrosion resistance of the base pipe.

Feature:
High performance finned tube
Made with the best technology
Resistant to high loads, both thermal and mechanical
More dimensionally stable
Requires minimal maintenance
Higher reliability
Optimized surface
Fewer fans reduce energy consumption
Requires less space
Less wiring
Easy installation
Highly economical
Save labor and material costs

Technical details/base tube details/Fin details

Pipe Diameter: Min. OD 20mm to Max. OD 219mm.

Tube Thickness: Min. 2mm to 16mm

Pipe material: stainless steel, alloy steel, carbon steel, Corten steel, duplex steel, super duplex steel, Inconel, high chromium high nickel and some materials such as Incolloy, CK 20 material.

Fin detail

Fin Thickness: Min. 0.8 mm to max. 4 mm

Fin Height: 0.25" (6.35 mm) minimum to 1.5" (38 mm) maximum

Fin Density: Minimum 43 fins per meter, maximum. 287 fins per meter

Materials: Carbon Steel, Stainless Steel, Alloy Steel, Weathering Steel, Duplex Steel and Incolloy.

If you need a quick quote, please send as follows:

1. The number of pieces,

2. Base pipe: (1) diameter, (2) thickness, (3) length and (4) material specification.

3. Fins: (1) material specification, (2) type (solid or serrated), (3) height, (4) thickness, (5) pitch, (5) fin length and (6) finless section .

If necessary, weld preparation details.

4. Desired delivery date.