Copper and Copper-Alloy Seamless Tube B111 C44300 C68700 C71500 ,O61,ET/HT For Condensers, Evaporators and Heat exchangers.

Copper and Copper-Alloy Seamless Tube B111 C44300 C68700 C71500 ,O61,ET/HT For Condensers, Evaporators and Heat exchangers.

ASTM B111 ASME SB 111 C44300 Admiralty Brass is ideal for heat exchanger tubes. Normally made to order to meet engineering requirements, you will find this alloy often times used in oil and gas applications that also require its non corrosive properties. C44300 and C68700 have good corrosion resistance. C44300 Admiralty Brass Seamless Tubes Tensile strength minimum in 310Mpa, Yield Strength minimum in 105Mpa.

ASTM B111 / ASME SB 111 C44300 Admiralty Brass Physical Properties

Typical Application of ASTM B111 ASME SB 111 C44300 Admiralty Brass

1. Industrial: Evaporator Tubing, Heat Exchanger Tubing, Condenser Tube Plates, Distiller Tubes, Oil Well Pump Liner, Ferrules, Bourdon Tubes, Condenser Tubes

2. C44300 admiralty brass tubes and C70600,C71500 copper nickel tubes are widely used in “Industrial Steam Turbine Condensers”

2. Plumbing: Strainers

SB111 C44300 material has the following benefits:

• Durability – The structure and chemical composition of an SB111 C44300 makes it durable. Its products can last up to 10 years, depending on where you are using it and the frequency of use.
• Cost-effective – The overall value of installing, functioning and maintaining products of this material is relatively low. You, therefore, get quality by selecting this material to manufacture your products.
• Versatile usage – You can manufacture different products using this material. For instance, you can make pipes and tubes for a variety of usage.

Test:

• Pitting Tests
• Intergranular Corrosion Test
• Chemical Analysis
• Hardness Test
•