ASME SA268 TP430 S43000 Ferritic Stainless Steel Seamless Tube for Oil and Gas Industry
ASME SA268 TP430 S43000 Ferritic Stainless Steel Seamless Tube for Oil and Gas Industry
ASME SA268 TP430 Stainless Steel Seamless Tube Chemical Composition
| Grade: | TP410 | TP430 | TP439 |
| UNS | S41000 | S43000 | S43035 |
| C, Max | 0.15 | 0.12 | 0.07 |
| Mn,Max | 1 | 1 | 1 |
| P, Max | 0.04 | 0.04 | 0.04 |
| S, Max | 0.03 | 0.03 | 0.03 |
| Si, Max | 1 | 1 | 1 |
| Ni | … | … | 0.50max |
| Cr | 11.5-13.5 | 16.0-18.0 | 17.00-19.00 |
| Mo | … | … | … |
| Al | … | … | 0.15 |
| Cu | … | … | … |
| N | … | … | 0.04 |
| Ti | … | … | 0.20+4(C+N)Min, 1.10max |
ASME SA268 TP430 Stainless Steel Seamless Tube Mechanical Properties
| Grade | Tensile Strength, Min, Ksi [MPa] | Yield Strength, Min, Ksi [MPa] | ELONGATION. MIN, % |
| TP410 | 55 [380] | 30 [205] | 20 |
| TP430 | 60 [415] | 35 [240] | 20 |
| TP439 | 60 [415] | 30 [205] | 20 |
ASME SA268 TP430 Stainless Steel Seamless Tube Physical Properties
| Density, g/cm3 (lb/in.3) | 7.8 (0.28) |
| Melting point, °C (°F) | 1425-1510 (2600-2750) |
| Specific heat capacity, J/kg · K (Btu/lb · °F) | 460 (0.11) at 0-100 °C (32 to 212 °F) |
| Electrical resistivity, μΩ·m | 0.60 at 20 ℃ |
| 430 stainless steel magnetic permeability | 600-1100 (Approximate) |
| Elastic modulus (Modulus of elasticity), GPa (106 psi) | 200 (29.0) |
| Thermal diffusivity, mm2/s | 7.3 |
| Thermal conductivity, W/m · K (Btu/ft · h · °F) | 26.1 (15.1), at 100 ℃ (212 °F) |
| 26.3 (15.2), at 500 ℃ (932 °F) | |
| Coefficient of thermal expansion, μm/m · °C (μin./in. · °F) | 10.4 (5.8), at 0-100 ℃ (32-212 °F) |
| 11.0 (6.1), at 0-315 ℃ (32-600 °F) | |
| 11.4 (6.3), at 0-538 ℃ (32-1000 °F) |
ASME SA268 TP430 Stainless Steel Seamless Tube Heat Treatment
- Annealing: Recommended annealing treatment for 430 steel is 650 °C (1200°F).
- Forging: Typical forging temperature for SS430 is 815-1120 °C (1500-2050 °F).
ASME SA268 TP430 Stainless Steel Seamless Tube Heat Resistance
| Maximum service temperatures, °C (°F) | ||
| AISI | Intermittent service | Continuous service |
| 430 | 870 (1600) | 815 (1500) |
ASME SA268 TP430 (S43000) Tubing in Oil & Gas Applications, Common Application Areas & Equipment:
-
Utility & Service Water Systems
-
Low-Pressure Instrumentation & Sensing Lines
-
Hydraulic Control Lines (Limited)
-
Vent & Drain Lines
-
Heat Exchanger Tubes (Limited & Specific)
-
Fuel Gas Piping (Conditional)
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.