Rectangular Finned Tube

Rectangular Finned Tube is a tubular structure that enhances heat transfer efficiency by adding rectangular fins on the outer surface. It is widely used in the field of heat exchange. The following are its key features, applications and design points:

1. Basic structure and characteristics

Base Tube
Usually a metal tube (such as copper, aluminum, stainless steel), the shape can be round tube, flat tube or rectangular tube.

Fins
Rectangular thin sheets welded, extruded or wound on the outer wall of the tube to increase the heat dissipation surface area (up to 5-20 times the base tube area).

Geometric features

Fin shape: rectangular, straight or segmented arrangement.

Fin spacing: optimized design according to the properties of the fluid (such as air, flue gas) to avoid dust accumulation or blockage.

Fin height: affects heat transfer efficiency and pressure drop (usually 5-30mm).

2. Core advantages

Efficient heat transfer: fins greatly expand the heat transfer area, especially suitable for gas-liquid heat exchange (such as air coolers).

Compact structure: achieve high heat exchange efficiency in a limited space and reduce the size of the equipment.

Anti-fouling ability: The rectangular fins have a larger gap and are easier to clean than spiral fins (suitable for dusty and high-viscosity fluids).

Flexible customization: Fin parameters (height, thickness, spacing) can be adjusted according to working conditions.

3. Manufacturing process

Extrusion molding: The aluminum tube and fins are extruded as one, with high strength and low contact thermal resistance (commonly used in air conditioning condensers).

Welding/brazing: The fins and base tubes are connected by high-frequency welding or laser welding (suitable for stainless steel and copper materials).

Wrapping: The metal strip is spirally wound and welded to the base tube (low cost, but poor temperature resistance).

4. Typical application scenarios

Heating, ventilation and air conditioning (HVAC)
Air-refrigerant heat exchange in air conditioning condensers, evaporators, and fresh air units.

Industrial waste heat recovery
Boiler flue gas waste heat recovery, chemical reactor cooling.

Power and energy
Gas turbine inlet cooling, power plant air cooling island.

Transportation
New energy vehicle battery cooling system, locomotive radiator.

5. Design considerations and selection

Fluid properties

Gas side: large fin area (low thermal conductivity) is required, such as air cooler.

Liquid side: low fin demand, focus on optimizing the flow rate in the tube (such as water pipe heat exchange).

Pressure drop control: Too dense fins will increase airflow resistance, and efficiency and energy consumption need to be balanced.

Material selection

Corrosion resistance: Copper-nickel alloy and titanium tubes are often used in marine environments.

High temperature environment: stainless steel or aluminized steel.

Cleanliness and maintenance: Dusty environments (such as boilers) require increased fin spacing or a detachable structure.

Inspection and Tests Performed

Chemical Composition inspection,
Mechanical Properties Test(Tensile Strength, Yield Strength, Elongation, Flaring, Flattening, Hardness, Impact Test),
Surface and Dimension Test,
No-destructive Test,