STAINLESS STEEL SEAMLESS COIL PIPE TP310S FOR START UP HEATER WITH COIL SUPPORT
STAINLESS STEEL SEAMLESS COIL PIPE TP310S FOR START UP HEATER WITH COIL SUPPORT
The coiled pipe unit can run thousands of meters of continuous joint-free steel pipes (diameter 9~88.9mm) into the production pipe of an oil and gas well to complete specific workover operations such as well cleanout, fishing, fracturing, acidification, etc. or into its casing for logging operations or direct.Coil heaters can be closely wound to provide concentrated heat or can be stretched to fulfill distributed wattage needs. Coil heaters can also accommodate integrated thermocouples for precise temperature control and quick response.
Bent and formed stainless steel pipe is used in a variety of applications, including:
- Manifold assemblies for the transportation industry
- Hydraulic fluid supply lines for industrial purposes
- Bumpers to protect OEM products
- Housing for water monitoring systems
- Tubular handles used in OEM instruments and machinery
| Comparison with Other Heater Types | |||
| Feature | Coil-Shaped Tubular Heater | Straight Tubular Heater | Open Coil Heater (Exposed Wire) |
| Structure | Metal tube bent into a coil | Straight metal tube | Bare, exposed resistance wire coiled around insulators |
| Robustness | Very High. Protected from physical contact and environment. | High. Protected but less surface area in a compact space. | Low. Exposed and fragile. |
| Watt Density | Very High | Moderate | High |
| Typical Use | Air heating, high-temp platens | Immersion in liquids, surface mounting on tanks | Toasters, domestic space heaters, non-hazardous air ducts |
| Safety | Very Safe. Sheath prevents electrical contact. | Very Safe. | Less Safe. |
Grades:
304, 316L, 310S, and others as specified by the customer.
Chemical Composition of ASTM A312 TP310S
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| 310 | min. max. |
- 0.25 |
- 2.00 |
- 1.50 |
- 0.045 |
- 0.030 |
24.0 26.0 |
- | 19.0 22.0 |
| 310S | min. max. |
- 0.08 |
- 2.00 |
- 1.50 |
- 0.045 |
- 0.030 |
24.0 26.0 |
- | 19.0 22.0 |
Mechanical Properties of ASTM A312 310S
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max |
||||
| 310 | 515 | 205 | 40 | 95 | 217 |
| 310S | 515 | 205 | 40 | 95 | 217 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.