LPJG16314A4NL Magnetic RJ45 Jack Compatible TE 6605814-6
Description of Magnetic RJ45 Jack:
Part Number | Number of Ports | Manufacturer | Description |
LPJG16314A4NL Cross Tyco 6605814-6 | Single Port | LINK-PP | 10/100M/1000Base-T RJ45 Ethernet Connector with magnetics |
| |||
Gender | Latch Orientation | EMI-Finger | Mounting Type |
Jack (Female) | Tab up | With | Thru-Hole |
| |||
Orientation | Termination | LED Color | Shielding |
90° Angle (Right) | Solder | G/Y & G/Y | Shielded |
NOTES : 4. The Magnetics Are Symmetrical And Support AUTO-MDI/MDIX.
| |||
6605814-6 RJ45 Connector Materials:
- Housing-Thermoplastic PET Polyester Flammability Rating UL 94V-0.
- Shield-0.01" Thick C26800 Brass Preplated With 30u Inch Min Sem-Bright Nickel; Solder Tabs Post-Dipped With 100u Inch Min Sac Solder
- MOD Jack Contacts-0.0157"X0.018" Thick, Phosphor Bronze, 50u Inch Min Overall Nickel Underplate, With Select 50u Inch Min Hard Gold Finish Plate.
- Solder tails with 100u Inch Min Matte Tin and or SAC solder Dip.
- Light Emitting Diode (LED)- Diffused Epoxy Lens.020x020 Carbon Steel wireframe Leads Preplated With 80u Nch Silver Over 40u Nch Nickel Underplateover 40u Inch Copper Underplate; Post-plated with 100u Inch Min Matte Tin And Or SAC Solder Dip Or Pure Tin Solder Dip.
Magnetics of 6605814-6 RJ45 Jack:
- Application: 10/100/1000 BASE-T
- IMPEDANCE: 100 OHMS
- TURNS RATIO (CHIP: CABLE): 1:1 All Four Pairs
- OPEN CIRCUIT INDUCTANCE (OCL): 350UH MIN @100kHZ,0.1VRMS 8mADC BIAS FROM O℃ TO 70℃, All Four Pairs
- All Four Pairs Bidirectional
- Performance @ 25°C:
INSERTION LOSS (IL): 1.1dB MAX From 0.5MHz to 100MHz
RETURN LOSS(RL):
18dB MIN From 0.5MHz to 40MHz
12-20LOG(f/80)dB MIN From 40.1MHZ to 100MHZ
CROSSTALK ATTENUATION:
35dB MIN From 0.5MHz to 40MHz
33-20LOG(f/50)dB MIN From 40.1MHZ to 100MHZ
COMMON MODE REJECTION RATIO (CMRR): 30dB MIN From 0.5MHz to 100MHz
ISOLATION VOLTAGE: 2250VDC (MAX) for 60 Seconds with a rise time of 500V/Sec.
LED Specifications:
The 250 OHM LED Resistors are optional, please see the Chart for the presence or absence of LED resistors. If the LED without 250 OHM resistors is driven with a constant current of approximately 20mA.
LED COLOR:
DOMINANT WAVELENGTH( A D): GREEN 568 nm TYP. at IF=20mA
FORWARD VOLTAGE(VF): GREEN 2.2V TYP. at IF=20mA
DOMINANT WAVELENGTH( A D): YELLOW 588 nm TYP. at IF=20mA
FORWARD VOLTAGE(VF): YELLOW 2.1V TYP.at IF=20mA
DOMINANT WAVELENGTH( A D): ORANGE 605 nm TYP. at IF=20mA
FORWARD VOLTAGE(VF): ORANGE 2.1V TYP. at IF=20mA
If the LED with 250 OHM resistors, the LED is driven with 5V Voltage, and the MAX operating current is 20mA.
LED COLOR:
DOMINANT WAVELENGTH( A D): GREEN 568 nm TYP. at VF=5V
FORWARD CURRENT(IF): GREEN 12 mA TYP. at VF=5V
DOMINANT WAVELENGTH( A D): YELLOW 588 nm TYP. at VF=5V
FORWARD CURRENT (IF): YELLOW 13 mA TYP. at VF=5V
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.