0826-1X2T-23-F RJ45 1x2 Gigabit Magjack Right-Angle Through-Hole
0826-1X2T-23-F Gigabit MagJack dual-port RJ45 connector with integrated magnetics, 12 cores, EMI shielding, 1500Vrms isolation, and LED indicators for 10/100/1000Base-T Ethernet networking equipment.
Dual Port RJ45 Connector Overview
The 0826-1X2T-23-F Gigabit MagJack is a dual-port (1×2) RJ45 connector with integrated Ethernet magnetics, designed for 10/100/1000Base-T Gigabit Ethernet applications.
This shielded right-angle through-hole RJ45 MagJack integrates LAN transformers, common-mode filtering, and dual LEDs, enabling simplified PCB design while ensuring excellent signal integrity, EMI suppression, and IEEE 802.3 compliant isolation performance.
With 12 cores per port and tab-up orientation, the 0826-1X2T-23-F is widely used in networking equipment such as Ethernet switches, routers, network interface cards (NICs), and industrial Ethernet devices.
Key Features
- Dual-port RJ45 MagJack (1×2 configuration)
- Supports 10/100/1000Base-T Gigabit Ethernet
- Integrated LAN magnetics
- Auto-MDIX compatible
- Shielded connector with EMI fingers
- Right-angle through-hole mounting
- Integrated LED indicators
- 1500Vrms isolation
- 30µin gold plated contacts
- UL94-V0 thermoplastic housing
- Board guide for precise PCB positioning
- High EMI shielding performance
- Connector dimensions comply with Ethernet interface mechanical standards
0826-1X2T-23-F Gigabit Magjack General Specifications
| Parameter | Specification |
|---|---|
| Part Number | 0826-1X2T-23-F |
| Connector Type | RJ45 MagJack |
| Port Configuration | 1 × 2 (Dual Port) |
| Ethernet Speed | 10/100/1000Base-T |
| Applications | Ethernet LAN, Auto-MDIX |
| Mounting Type | Through Hole |
| Orientation | Right Angle (90°) |
| Termination | Solder |
| Height Above PCB | 13.59 mm |
| LED Color | Green / Orange / Yellow |
| Tab Direction | Up |
| Number of Cores per Jack | 12 |
| Shielding | Shielded with EMI Finger |
| Packaging | Tray |
| Operating Temperature | 0°C to +70°C |
Electrical Characteristics of 0826-1X2T-23-F RJ45 1x2
Transformer Parameters
| Parameter | Specification |
|---|---|
| Turns Ratio | 1CT : 1CT ±2% (TP1-TP4) |
| Inductance (OCL) | ≥350 µH @100kHz, 100mV RMS |
Insertion Loss
| Frequency | Max Loss |
|---|---|
| 0.1–1 MHz | −1.1 dB |
| 1–65 MHz | −0.5 dB |
| 65–100 MHz | −0.8 dB |
| 100–125 MHz | −1.2 dB |
Return Loss
| Frequency | Min |
|---|---|
| 0.5–40 MHz | −18 dB |
| 40–100 MHz | −12 + 20log(f/80MHz) dB |
Noise Suppression
| Parameter | Specification |
|---|---|
| CM-CM Rejection | ≥ −30 dB (100kHz–100MHz) |
| CM-DM Rejection | ≥ −35 dB (100kHz–100MHz) |
Isolation
| Parameter | Specification |
|---|---|
| Hipot | 1500 Vrms |
| Compliance | IEEE 802.3 Isolation Requirement |
All units are 100% production tested to ensure compliance with Ethernet isolation standards.
LED Electrical Characteristics
LED 1 – Yellow
| Parameter | Value |
|---|---|
| Forward Voltage | 2.1 V typ @20mA |
| Dominant Wavelength | 590 nm typ |
LED 2 – Green / Orange
| Color | Forward Voltage | Dominant Wavelength |
|---|---|---|
| Green | 2.2 V typ | 565 nm |
| Orange | 2.0 V typ | 610 nm |
0826-1X2T-23-F RJ45 Datasheet
0826-1X2T-23-F Datasheet - Schematic
0826-1X2T-23-F Datasheet - RECOMMENDED PCB FOOTPRINT
0826-1X2T-23-F Datasheet-Footprint
Mechanical & Material Specifications
| Component | Material |
|---|---|
| Housing | PBT Thermoplastic |
| Flammability Rating | UL94-V0 |
| Contacts | Copper Alloy |
| Contact Plating | 30 µin Hard Gold |
| Shield | Nickel-plated Copper Alloy |
| Wire | Tin-coated Copper Wire (0.018") |
FAQs About 0826-1X2T-23-F Gigabit MagJack
1. What is a Gigabit MagJack?
A Gigabit MagJack is an RJ45 connector that integrates Ethernet magnetics (transformers and common-mode chokes) inside the connector housing, simplifying PCB design for Ethernet devices.
2. What Ethernet speeds does 0826-1X2T-23-F support?
The connector supports 10Base-T, 100Base-TX, and 1000Base-T Ethernet applications compliant with IEEE 802.3 standards.
3. What isolation voltage does the connector provide?
The integrated magnetics provide 1500Vrms isolation, meeting the Ethernet safety requirements defined by IEEE 802.3.
4. What is the operating temperature range?
The connector is designed for 0°C to +70°C operating temperature, suitable for commercial networking equipment.
Other RJ45 Magjack List
| 0826-1X2T-23-F Multi-port RJ45 1x2 Gigabit Magjack Dual Port 10/100/1000Base-T | |||
|---|---|---|---|
| 0826-1X2T-23-F | 0826-1X2T-23-F | 0826-1G1T-23 | 1-6605706-1 |
| 0810-2H4R-28 | 2-1761889-1 | 0826-1G1T-78 | 0826-1G4T-32 |
| 0811-1X1T-06 | 1840506-6 | 1-6610132-1 | 2-1761889-1 |
| 0826-1G4T-32 | 0826-1X2T-23-F | 2-1761889-1 | 0826-1D2T-23-F |
| 1761889-1 | 6-1840402-1 | 1761889-3 | 2-1761889-3 |
| 0813-1X1T-43 | 1-1840402-6 | 6-1840402-7 | 2-1761889-1 |
| 0826-1X2T-23-F | 203218 | 0826-1X2T-23-F | 0826-1X2T-23-F |
| 1-1840402-6 | 2-1761889-3 | 0826-1X1T-M1-F | 6-1761889-8 |
| 203218 | 1761889-1 | 6-1840402-7 | 1-1840402-6 |
| 1761889-8 | 6-1840402-1 | 203218 | 0826-1D2T-23-F |
| 0826-1X2T-23-F | 1761889-1 | 1761889-3 | 0826-1D4T-M1-F |
| 0826-1A1T-32-F | 0826-1D2T-23 | 6-1840402-1 | 0826-1X2T-23-F |
| 2-1761889-3 | 2-1761889-2 | 0826-1D2T-23-F | 0826-1X4T-23 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.