600L gelatin melting tank is a 3 layers with water bath type tank, which material is SS304, with diameter 1000mm/ 1200mm, height 1950mm, wall 5mm, 5mm insulation heating jacket, peel for temperature conservation is 2mm, three phase 220V 60Hz,
Vacuum degree in the tank: -0.09Mpa
The working pressure inside the tank: less than -0.09Mpa
Jacket working pressure: atmospheric pressure
Working temperature in the tank: -99 C at normal temperature
The height of the supporting foot seat of the tank to the outlet valve is 660mm
The Series of gelatin reactor is the essential equipment in gelatin preparation.
The Capacity is from 450L, to 1000L
Vacuum degree in the vessel: 0.02-0.09 Mpa.
Working pressure in the vessel: 0.03-0.05 Mpa.
Examining Pressure in the vessel: 0.Gelatin Melting Tan3-0.4 Mpa.
Working pressure in the jacket: 0.03-0.098 Mpa
Working temperature in tank: 50-100 °C
Conveyor granule: 30 CP
Sealing parts and ring can used more than 3,000 hours continuously.
Insulating layer use super-fine glass cotton.
Inner vessel and insulation layer (covered layer) of the Tank, those sections exposed to raw material are made of 1Cr18Ni9Ti stainless steel.
It’s mainly for softgel making and paintball making enterprises. Besides, the cosmetic manufacturer also needs this to make cosmetics, such as bath beads. And health products manufacturers also need this to make different softgels for the different needs.
Softgel Gelatin Melting Tank, Gelatin Service Tank, Paintball Gelatin Melting Tank
