Battery Pack Module Charge And Discharge EV Battery Life Cycle Testing Equipment
Battery Pack Module Charge and Discharge EV Battery Life Cycle Testing System
Description:
Lithium batteries for electric vehicles
Lithium battery for electric bicycle
Energy storage lithium battery
| Input AC | AC 380V ±15%/50/60±5Hz | ||||||||||
| Output Power | 24 | KW | |||||||||
| Input Current | 42.9 | A/Phase | |||||||||
| Input Power | 28.2 | KW | |||||||||
| Voltage | CV output range | 3~60V | |||||||||
| Min discharge voltage | 3 | V | |||||||||
| Accuracy | ±(0.02% of FS+0.02% of RD) | ||||||||||
| Stability | ± 0.1% of FS | ||||||||||
| Current | Output range/channel | 0.5A~100A | |||||||||
| Accuracy | ±(0.05% of FS+0.05% of RD) | ||||||||||
| CV cut-off current | 0.2A | ||||||||||
| Stability | ± 0.1% of FS | ||||||||||
| Power | Output power/channel | 6KW | |||||||||
| Stability | ±0.2% of FS | ||||||||||
| Time | Current response time | Max rising time: 5ms (10% to 90% or 90% to 10%) | |||||||||
| Working step time | ≤(365*24)h/step, Time format-00:00:00.000(h,m,s,ms) | ||||||||||
| Data record |
Data record conditions |
Min data record interval:10ms (connected with AUX channel:100ms) | |||||||||
| Min voltage change:0.12V | |||||||||||
| Min current change:0.2A | |||||||||||
| Frequency | 100Hz (connected with AUX channel:10Hz) | ||||||||||
| Charge | Charge mode | Constant current, Constant voltage, Constant current and voltage, Constant power | |||||||||
| Cut-off condition | Main channel:Voltage, Current, ΔTime, Capacity,-ΔV | ||||||||||
| Discharge | Discharge mode | Constant current, Constant power, Constant resistance | |||||||||
| Cut-off condition | Main channel:Voltage, Current, ΔTime, Capacity | ||||||||||
| Pulse Mode |
Charge | Constant current, Constant power | |||||||||
| Discharge | Constant current, Constant power | ||||||||||
| Min pulse width | 100ms | ||||||||||
| Pulse cycles | up to 32 | ||||||||||
| Chg and Dischg switch | Supported | ||||||||||
| Cut-off condition | Voltage, Time | ||||||||||
| Simulation | Charge | Constant current, Constant power | |||||||||
| Discharge | Constant current, Constant power | ||||||||||
| Cut-off condition | Time,Line number | ||||||||||
| Continuous switching Chg and Dischg |
One simulation step can realize continuous switching from charging to discharging |
||||||||||
| Limit step number | 1 million | ||||||||||
| Cycle | Max cycles | 65535 | |||||||||
| Max steps | 254 | ||||||||||
| Cycle nest | 3 | ||||||||||
| Protection | Power-off data protection | ||||||||||
| Off-line operation mode | |||||||||||
| User-defined protection conditions, such as upper and lower limited current/voltage, delay time, temperature, etc. |
|||||||||||
| Efficiency of Charge and discharge | >85% | ||||||||||
| Protection level | IP20 | ||||||||||
| Channels parallel | supported, Parallel channels do not support pulse and simulation testing |
||||||||||
| Channels feature | Independent pairs of closed loop for constant | ||||||||||
| Energy feedback | The discharge energy can be fed back to the grid | ||||||||||
| Channels control mode | Independent control | ||||||||||
| Noise | ≤65dB | ||||||||||
| Database | MySQL | ||||||||||
| Communicatin | TCP/IP | ||||||||||
| Data export | EXCEL,TXT,CSV,PDF,Plot/Graph | ||||||||||
| Disk drive | 500GB | ||||||||||
| Operating system | Windows 7/8/10 64 bit | ||||||||||
| Communication port | Ethernet port, CAN communication supports communication with BMS to obtain cell voltage and temperature in BMS |
||||||||||
| Items | Values | ||||||||||
| Number of channels | 4 | ||||||||||
| Dimensions(W*D*H)(mm) | W*D*H:600*800*1300(mm) | ||||||||||
| Working Environment requirement | |||||||||||
| Items | Values | ||||||||||
| Operation environment temperature | -10ºC~45ºC(When the temperature is 25±10ºC, the measurement accuracy is guaranteed: accuracy drift 0.005% of FS /ºC) |
||||||||||
| Storage environment temperature | -20ºC~50ºC | ||||||||||
| Operation environment humidity | ≤70% RH(no moisture condensation) | ||||||||||
| Storage environment humidity | ≤80% RH(no moisture condensation) | ||||||||||
| Other models (Voltage and Current) | |||||
| 60V20A | 60V30A | 60V50A | 60V60A | 60V100A | 60V120A |
| 60V400A | 60V240A | 120V50A | 120V100A | 120V200A | 120V400A |
| 200V50A | 500V100A | 200V200A | 400V200A | 750V500A | 800V600A |
| Machine equips Charge and Discharge Port or Discharge voltage below 0V is Optional | |||||
ABOUT HAIDA
Haida International Equipment Co,Ltd was established in 2004, located in Dongguan city, Guangdong Province, China, is specialized in production and R&D of various material physical properties testing equipment. We have our own independent research and development center and four testing equipment production lines: textile, footwear, leather, mask. In 2006, textile, footwear, leather mask testing equipment officially put into production and entered the international market.
Why choose us?
1.Design & Production : Solution Consultation for each order
Recommend the most cost -performance machine
Research & Develop the suitable one for Special- designed Model.
2.Shipping & Delivery: One-Stop Service
Production- Deliver to your door - Installation & Training- Technical Support
3.Warranty
1 year warranty with lifetime technology support
4.After-Sale Service
React within 2 Hours
Video inspection & on-site service combined
FAQ
Q: How about your warranty?
A: Generally, our warranty is one year. Within the warranty period, we can offer technique support and part parts change, if it's necessary, our engineers may go to your place for better service.
Q: What is the order process?
A: Get Inquiry - Send the Quotation - Confirm the requirements - Order confirming - Payment - production - testing and debugging- packing - Confirm with customer about the necessary documents- Arrangement the Delivery - Send the product out - Customer Receiving - After Service.
Q: Can we visit your factory before order?
A: Yes, we warmly welcome and sincerely invite you and your team to visit our factory, we will help to arrange hotel and pick up you from airport.
Q: Do you accept customization service?
A: Yes, of course, we can not only offer standard machines, but also customized machines according to your request. Don't hesitate to tell us your requirement, we will do our best to meet your needs.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.