Temperature Humidity Chambers With Stainless Steel Plate

INTRODUCTION:
Temperature Humidity Chambers can simulate both temperature and humidity. Controlled humidity from 20%RH to 98%RH can be maintained within the dry-bulb temperature range of -70°C to +150°C, For lower dewpoint conditions (low RH or relative humidity at low dry-bulb temperatures), you will need dry air purge or GN2 (gaseous nitrogen) purge. See the humidity range chart on the specification page of each temperature-humidity chamber for humidity range limits.
 

GENERL SPECIFICATIONS :

Power supply source: three-phase, 380V±10%, 50Hz (can be appointed)

Gross Weight: 250kg

HS Code: 8479899990

STANDARD FEATURES:

APPLICATIONS:

1. To simulate test environment with different temperature and humidity

2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…

3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation

4. Uncover test unit weakness in a short-term test with accelerated time effect

CHAMBER DESIGN FEATURES:

1. High performance and quiet operation (68 dBA)

2. Space-saving designed for flush installation to wall

3. Full thermal break around doorframe

4. One 50mm diameter cable port o left, with flexible silicone plug

5. Accurate wet/dry-bulb humidity measurement system for easy maintain

PROGRAMMABLE CONTROLLER:

1. PLC controller for test chamber

2. Step types include: ramp, soak, jump, auto-start, and end

3. RS-232 interface to connect computer for output