High And Low Temperature Humidity Test/Testing Chamber
High And Low Temperature Humidity Test/Testing Chamber
Description:
Thermal shock Chamber for environmental climate simulation test with separate hot and cold zones, the Automated Thermal Stress System has a patented, retractable product transfer carrier basket that makes full use of the available workspace in both temperature zones for increased product loading and throughput. The product transfer carrier basket reduces the overall height requirements of the chamber and is made as light as possible to minimize thermal loading restraints. Salt spray test chambers can be used as part of most thermal cycling reliability and quality control programs.
Main Parameters:
| Model | HD-E703-100K40 | HD-E703-100K55 | HD-E703-100K65 | |||
| Nominal content product(L) | 100 | |||||
| Interior dimension(mm) | 500×450×450(W×H×D) | |||||
| Overall dimension(mm) | 1455×1790×1980(W×H×D) | |||||
| Temperature range |
High temperature | RT～170 ℃ | ||||
| Low temperature | －75℃ ～RT | |||||
| Test area | －40℃ ～150℃ | －50℃ ～150℃ | －65℃ ～150℃ | |||
| Temperature shock range | High temperature | 60℃ ～150℃ | ||||
| Low temperature | －10℃ ～－40℃ | －10℃ ～－50℃ | －10℃ ～－65℃ | |||
| Normal temperature area | Room temperature | |||||
| Temperature and humidity deviation | ±0.3℃,±2%R·H | |||||
| Average difference in temperature and humidity | ±2℃,±3%R·H | |||||
| Heating rate | 2℃/min | |||||
| Cooling rate | 0.5~1.2℃/min | |||||
| Storage time | RT→－75℃≤ 65min | |||||
| Heat storage time | RT→170℃≤ 35min | |||||
| Refrigeration system :Compressor | Import of France taikang/Germany, R404A/R23 refrigerants | |||||
| Refrigeration system :Cooling way | Water cooling or air cooling | |||||
| Refrigeration system :Condenser | Stainless steel brazed plate type heat exchanger | |||||
| Refrigeration system :Heater/evaporator | Nickel-chromium electric heater/finned evaporator | |||||
| Microcomputer & display screen | TT-5188T3-7HL Taitong controller | |||||
| Driving motor | Fengyu brand | |||||
| Temperature and humidity sensor | Japan | |||||
| Safety measures | No fuse switch, compressor overpressure, overheat, overcurrent protection, fuse, water flow protection, phase sequence protection, oil pressure protection, pressure relief protection, low pressure protection, pressure cylinder protection, temperature limit protection | |||||
| Chassis shell Material | High quality cold rolled steel sheet is sprayed with static electricity | |||||
| Inner wall of the case Material | SUS304# Stainless steel plate | |||||
| Heat preservation material | Polyurethane rigid foam + high density fiberglass cotton | |||||
| Standard configuration | Test hole, floodlight, double vacuum bulletproof glass observation window | |||||
| Power supply | three-phase,380V,50Hz | |||||
High Temperature Chamber:
Heater: NI-CR alloy electric heater
Draught fan: Share centrifugal fan when high temperature and do environmental temperature, preheating with axial flow fan.
Low Temperature Chamber:
Cooler: Fin cooler, regenerator
Draught fan: centrifugal fan
Controller:
Operate interface: 6" color LCD touch screen
Program memory capacity: 100 groups (modify by operator)
Setting range: Time: 1 minute ~ 99 hour 59 minute, cycles: 1~ 999 cycles
Resolution: temperature: 0.01 ℃; time: 1 minute
Input: T thermocouple
Control method: P.I.D control
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.