Description

HX711 Weighing Pressure Sensor Module amplifier is based on HX711, which consist of an amplifier and a precision 24-bit analog-to-digital convertor designed for weigh scale and industrial control applications to interface directly with a bridge sensor. Compared with other chips, HX711 not only has a few basic function, also contains high integration, fast response, immunity, and other features. The chip lowed the cost of the electronic scale, at the same time, improving the performance and reliability. The input interface of this weight sensor module is used sensor interface, which is compatible with open source board I/O ports. The output adopts compact terminal that makes weight sensor module easier to connect the weight sensor. It's the best choose for electronic enthusiast to do some tiny home scale.

This HX711 Weighing Pressure Sensor Module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale design, with two analog input channel, the internal integration of 128 times the programmable gain amplifier. The input circuit can be configured to provide a bridge type pressure bridge (such as pressure, weighing sensor mode), is of high precision, low cost is an ideal sampling front-end module.

Specification:

1.Two selectable differential input channels
2.On-chip active low noise PGA with selectable gain of 32, 64 and 128
3.On-chip power supply regulator for load-cell and ADC analog power supply
4.On-chip oscillator requiring no external component with optional external crystal
5.On-chip power-on-reset
6.Simple digital control and serial interface: pin-driven controls, no programming needed
7.Selectable 10SPS or 80SPS output data rate
8.Simultaneous 50 and 60Hz supply rejection
9.Current consumption including on-chip analog power supply regulator: normal operation < 1.5mA, power down < 1uA
10.Operation supply voltage range: 2.6 ~ 5.5V
11.Operating Temperature Range:-20 degree ~ +85 degree

12.Size:38mm*21mm*10mm

Application

Widely used in aerospace, mechanical, electrical, chemical, construction, medicine and many other fields, used to measure force, pressure, displacement, strain, torque, acceleration.

Package Included:

1 pc HX711 Weighing Pressure Sensor Module

 

More Photo:

 

 

More product:

	UNO R3 + breadboard 400 point + 9V battery snap Starter Learning Kit		HC-06 Bluetooth Wireless Module
	Mega 2560 R3 ( CH340G )		HC-SR501 Human body Pyroelectric Infrared sensor PIR
	DC 5V Stepper Motor 28BYJ-48 + ULN2003 Driver Test Module		Ultrasonic Sensor HC-SR04
	LCD 1602 I2C module (Yellow Green light) ( Red board module)		20cm Male TO Female 40Pin Solderless Jumper Breadboard Wire

 

FAQ:

1. What is the delivery time?

Normally, 1-5 workdays after payment;

Special requirement orders, delivery time is negotiable.

 

2.If the products can’t work after receiving it,what should I do?

We will replace new items for you at once, and respect your final decision for wrong goods.

 

3.If the products don’t meet my demand after I received it,can I return it?

Yes,no problem.

You can return back to us, we will refund your full payment.