Overheat Protection DMX512 200W IP20 Sharpy Beam Stage Lighting LED Moving Head Light
MF-DM200W LMB BEAM SHARPY MOVING HEAD LED STAGE LIGHT
Specifications:
CHANNEL TABLE
|
CHANNEL
|
24 CHANNEL PATTERN
|
| 1 |
Color
|
| 2 |
Strobe
|
| 3 |
Dimming
|
| 4 |
Gobo
|
| 5 |
Prism 1
|
| 6 |
Prism 2
|
| 7 |
Prism 1 Rotate
|
| 8 |
Prism 2 Rotate
|
| 9 |
Frost & Colorful
|
| 10 |
Focus
|
| 11 |
X
|
| 12 |
X Fine
|
| 13 | Y |
| 14 |
Y Fine
|
| 15 |
XY Speed
|
| 16 |
Reset
|
| 17 |
LED Dimming
|
| 18 |
LED Strobe
|
| 19 |
LED Red
|
| 20 |
LED Green
|
| 21 |
LED Blue
|
| 22 |
LED Color Macro
|
| 23 |
LED Scene
|
| 24 |
LED Scene Speed
|
TECHNICAL SPECIFICATION
|
Voltage
|
AC200-240v 50/60Hz |
|
Power of Light Source
|
200W
|
|
Color Disk
|
Each color disk consists of 14 color plates + white light
|
|
Pattern Plate
|
10 gobos with 3 glasses gobos+ white
|
|
Control Mode
|
DMX512/ master-slave/Automatic
|
|
IP
|
20
|
|
Protection
|
Overheat Protection
|
|
540° translation, 270° tilt
|
|
Common Fault:
Follow the previous step to check them one by one;
Setup:
|
Options
|
Instructions
|
|
|
Running Mode
|
DMX |
Slave state: Receives DMX signals from the console or
mainframe
|
|
Bootstrapping
|
Host state: Self-actuated and sends DMX signal to slave
|
|
| Voice Control | ||
|
DMX Address
|
1-512
|
Press "OK" to enter editing mode.At this point, the
hundreds digit is selected, and press the "up" and "down"
keys to change the address code.Press the "OK" key again
to select the tens edit.Press "OK" once more to select the
ones edit.Press again to exit the editing state
|
|
Motor Reset
|
off | |
| on |
Light fixture reset
|
|
|
Channel mode
|
24CH
|
24 channel mode
|
|
Language
|
Chinese |
Set to the Chinese interface
|
| English |
Set to the English interface
|
|
|
Screen Flip
|
off |
Front display
|
| on |
Screen reverse display
|
|
|
X Inversion
|
off | |
| on | ||
|
Y-reverse
|
off | |
| on | ||
| XY Swap | off | |
| on |
Channel for switching XY axes (including trims)
|
|
|
XY Encoder
|
on |
Use an encoder (optocoupler) to judge out of step and
automatically correct the position
|
| off |
Correct the position without using an encoder (optocoupler)
|
|
|
DMX Signal
|
Hold
|
Continue running in its original state
|
|
Clear Zero
|
Turn the motor back and stop running
|
|
|
The color wheel changes linearly
|
on |
The color wheel changes linearly
|
| off |
Color wheel nonlinear change, half color change
|
|
|
Restore Default Settings
|
When you see the confirmation dialog after pressing "OK",
press "OK" again to restore the default Settings
|
|
As shown in Figure 2, before positioning the lamp, it is necessary to ensure the stability of the installation site. When installing the reverse hanging, it is necessary to ensure that the lamp does not fall down on the support frame. It is necessary to use the safety rope through the support frame and the lamp handle for auxiliary hanging to ensure safety. Prevent the
When installing and debugging the lamps, it is forbidden for pedestrians to pass under them. Regularly check whether the safety rope is worn and whether the hook screws are loose.
Our company does not assume any responsibility for all consequences caused by the fall of the lamp due to the unstable installation of the hanging.
1. If the current is not the main interface, press the "left" key (one or more times) to return to
2. In the home screen, press the "up" key or "down" key to select the "Settings" button
3. Press the "OK" key to enter the "Settings" interface
4. In the "Settings" interface, press the "up" key or "down" key to select "DMX address"
5. Press the "OK" key to enter the editing state
6. Press the "up" key or "down" key to modify the DMX address code
7. Press the "OK" key to exit the editing state
Applications:
Moving head lights are versatile lighting fixtures used in stage productions, concerts, nightclubs, and other entertainment events. They consist of motorized heads that can move horizontally and vertically to direct light beams. They are used to illuminate performers, create dynamic lighting effects, and enhance visual displays.
Packing:
|
Product Name
|
Quantity |
|
Moving Head Light
|
1 PCS |
|
Power-line
|
1 BASE |
| User Manual | 1 PCS |
FAQ:
Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light, explosion proof light, tri-proof light, downlight, and other lighting products, as well as responsible services and reliable after-sales warranty.
Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally before our production and confirm the design firstly based on our sample.
Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One sample or mixed samples are acceptable.
Q5: How long time to ship the goods if place an order?
A5: Usually 7 days for sample or small order,15 working days for bulk order, but sometimes depend on the order quantity.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.