Small Mobile Phone Wireless Charging Coil Double Layer With Ferrite
wireless Charging Coil Assembly WX5010-6R3K23 Using for Mobile Phones Battery or battery Chargers Cameras
1. DIMENSIONS(MM)
| A(mm) | 50.0+/-1.0 |
| B (mm) | 20.5+/-0.5 |
| C(mm) | 1.5~3.0 |
| C1(mm) | 5.0+/-1.0 |
| D(mm) | 5.3+/-0.3 |
| E(mm) | 8.0Ref |
| F(mm) | 2.5Max |
| H(mm) | 43.5+/-1.0 |
2.MATERIAL
a,CORE:KC40 50*5.3*1.0 L
b,WIRE:∮0.08*105P*10.5TS
c,Sn:Sn99.3% Cu:0.7%
d.yellow adhesive:1603
e.tape maroom:mylar tape 8.0mm width
f.black glue CN/Euro G0T15 with tearing hand
3. ELECTRICAL DIAGRAM:
4.ELECTRICAL CHAR ACTERISTIC:
| ITEM | SPEC | TEST EQUIPMENT | TEST CONDITION |
| INDUCTANCE(L) | 6.3uH+10% | WK5237 OR EQU | 100KHz/0.25V |
| DCR | 60(mΩ)MAX | 502BC | |
| Q Value) | 70 Min | WK5237 OR EQU | 100KHz/0.25V |
5.SPECIFICATION NO:
|
WX 5010 — 6R3 K23 ① ② ③ ④ ①Product symbol: ②Dimmensions: ③Inductance : 2R2:2.2μH, R47:0.47μH,310:31uH,501:500uH,152:1.5mH ④Tolerance: J－±5% K－±10% M－±20% N－±30% P－MIN
|
6.TEST DATA:
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||
|
1.STORAGE TEMPERATURE:
|
-40℃～85℃ |
|
2.OPERATING TEMPERATURE RANGE :
|
-40℃～+85℃(CONTAIN HEATING COIL) -40℃～+85℃ |
|
3.EXTERNAL APPEARANCE :
|
NO EXTERNAL DEFECTS CAN BE FOUND IN THE VISUAL INSPECTION.
|
|
4. TERMINAL STRENGTH
|
FIXED INDUCTORS,ONE END OF THE ELECTRODE WITH 0.45KG PULLING FORCE,GUIDED THE NEEDLE DOES NOT FALL OFF.
|
|
5.INSULATING RESISTANCE :
|
THE INSULATION RESISTANCE SHOULD BE OVER 1000MΩ WHEN D.C.100V IS APPLIED TO THE WINDING –CORE. MEANWHILE NO STRUCTURE AND ELECTRIC DEFECTS SHOULD BE FOUND FOR 1 MINUTE.
|
|
6. HUMIDITY TEST :
|
INDUCTANCE DEVIATION IS WITHIN ±10.0% AND NO STRUCTURE AND ELECTRIC DEFECTS CAN BE FOUND AFTER 96±2hours TEST UNDER THE CONDITIONOF RELATIVE HUMIDITY OF 90～95% AND TEMPERATURE OF 40±5℃. AND 1 HOUR STORAGE UNDER ROOM AMBIENT CONDITIONS AFTER THE DEVICE IS WIPED WITH DRY CLOTH.
|
|
7. VIBRATION TEST :
|
INDUCTANCE DEVIATION IS WITHIN ±10.0％ AFTER 1
HOUR SWEEPING VIBRATION IN EACH THREE DIRECTIONS. NAMELY, FREQUENCY IS10～55Hz ANDTHE AMPLITUDE OF 1MINUTE CYCLE IS 1.5mm . |
|
a. Quantilty b. Packaing Dimensions (mm)
Used PE Packaing |
9.Background
Inductive Coupling: good coupling between two coils, a transmitter coil and a receiver coil. An alternating current in the transmitter coil generates a magnetic field which induces a voltage in the receiver coil. This voltage can be used to power a mobile device or charge a battery. It is ideal for wireless charging transmitter coil assembly and increase the charging efficiency.
10.Features
Wireless charging transmitter coil assembly (Tx - coil)
Litz wire winding Shield by Ni-Zn ferrite material
Compliance with Qi standard of WPC
11.Applications
Mobile Phones
Battery or battery Chargers
Cameras
MP3 /PMP
MID's
Hand Held Devices
Gaming devices
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.