PBT Engineering Plastics Power Surge Protection Device PA66 Nylon Material
Surge Protection Device / Contact Material : PA66 Nylon Material And PBT Engineering Plastics
1.High energy surge protection
2.Remote alarm interface
3.Failure detection indicator
4.Standard modular installation
G2060MT: The power line blocks the total power disribution cabinet of the nuildings that are embedded in the ground
A distribution box with an outside entry and exit line in the building
Outdoor distribution cabinet/distribution box.
Technical Parameters
|
System voltage Un
|
500/600VDC
|
1000VDC
|
|
Max. continous operation AC voltage
|
585VDC-615VDC
|
585VDC-615VDC in series connection
|
|
Norminal discharge current(8/20μs)
|
20kA
|
20kA
|
|
Maximum discharge current (8/20μs)
|
40kA
|
40kA
|
|
Voltage protection level (L-N)
|
2.4kV
|
4kV
|
|
Response time (L-N) tA
|
≤25ns
|
≤25ns
|
|
Environment temperature Tu
|
-40℃~70℃
|
-40℃~70℃
|
|
Status indicator
|
Green(good) / red(need replacement)
|
Green(good) / red(need replacement)
|
|
Mounting
|
35mm Standard Guide
|
35mm Standard Guide
|
|
Cross section of wire (Min.)
|
16mm2
|
16mm2
|
|
Cross section of wire (Max.)
|
25mm2
|
25mm2
|
|
Casing material
|
PA6 UL94-V0
|
PA6 UL94-V0
|
|
Degree of protection
|
IP20
|
IP20
|
|
Remote Signalling
|
Inside preinstalled optional
|
Inside preinstalled optional
|
Feature:
1,Protect electric system and on-loading electrical apparatus from thunder and instantaneous over-voltage.
2,Protect transmission of Ethernet signals with 48V DC / 34V AC power supply circuits against
lightning induced surges.
3,Enhanced surge protection.
4,For mounting on 35mm DIN rails acc. to EN 60715
5,It can effectively ensure the equipments work properly
Technology SPD parameter(Note:According to user requirement ,can be customized Uc=140V,440V,550V,voltage range of range of the SPD):
| Type No. | Rated Voltage(V) Un | Continuous Voltage Uc(V~) | Standard Discharge Current In(KA) |
Max Discharge Current Imax(KA) |
Protection Level(KA~) | Response Time(ns) |
| DGM1(2)-D5 | 220/380 |
275/320 385/420 |
5 | 10 | 1.2 | ≤25 |
| DGM1(2)-D10 | 10 | 2 | 1.6 | |||
| DGM1(2)-C20 | 20 | 40 | 1.8 | |||
| DGM13-B30 | 30 | 60 | .2.2 | |||
| DGM3(4)-B40 | 10 | 80 | 2.4 | |||
| DGM(4)-B60 | 60 | 100 | 2.8 | |||
| DGM-N-PE | 220/255 | 40/60 | 60/80 | 1.2 | ≤100 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.