Low Teerature Li Polymer Battery 8042130 5300 MAh 3.7V For Power Tools
1. Specification
|
NO. |
Item |
Specifications |
Notes | ||
| 4.1 | Nominal capacity | 5300mAh |
After the standard charge, 0.2C discharge 5.6V 0.2C 5.6V |
||
| Minimum capacity | 5200mAh | ||||
| 4.2 |
Initial Iedance
|
Pack ≤180mΩ |
After standard charge,AC1KHz test
|
||
|
4.3 |
Weight
|
Approx(约):208g |
|
||
|
4.4 |
Nominal voltage
|
7.4V |
|
||
|
4.5 |
Charge limit voltage
|
8.4V | |||
|
4.6 |
Discharge cut-off voltage
|
5.6V | |||
| 4.7 |
Standard charge current
|
1060mA | Ambient teerature | ||
| 4.8 |
Maximum charge current
|
2650mA | Ambient teerature 15~+45℃ | ||
| 4.9 |
Standard discharge current
|
1060mA | Ambient teerature -10~+55℃ | ||
| 4.10 |
Maximum discharge current
|
5300mA | Ambient teerature 10~+45℃ | ||
|
4.11 |
Charging time
|
6.0-8.0 hours(Ref.) 6.0-8.0 |
Standard Charging | ||
|
3.5 至4.5hours(Ref.) 3.5 至4.5 |
Rapid charge | ||||
|
4.12 |
Operating teerature
|
0℃~45℃ | Charging | ||
| -20℃~55℃ | Discharging | ||||
|
Storage teerature
|
-10℃~ +45℃ |
less than 1 month
|
Recommended storage teerature: 25℃,at the shipment state | ||
| -10℃~ +35℃ |
less than 6 months
|
||||
| 4.13 |
Recoverable capacity
|
Constant current 0.2C charge to 8.4V, then constant voltage 8.4Vcharge to current declines to 0.01C, rest for 10min,constant current 0.2C discharge to 5.6V,rest for 10min.Repeat above steps 3 times, recording the maximum capacity
|
| 4.14 |
Storage Humidity
|
≤75% RH |
|
4.15 |
Appearance
|
Without distortion and leakage
|
|
4.16 |
Standard testing condition
|
Teerature : 25±2℃ Humidity : ≤75%RH Atmospheric Pressure: 86-106 Kpa |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.