PP Woven Bottom Valve Sacks Making Machine For Putty Power Bag
90-120pcs/min PP Woven Block Bottom Valve Sacks Making Machine For Putty Power Bag
Valve sacks or valve bags provide the perfect packaging solution for high speed filling of powdered products whilst maintaining a dust free working environment.
Available in Polythene, Paper or Woven Polypropylene, valve sacks can be used for many products from dyes to foodstuffs. Once filled they form a solid block which makes them easily stackable on the pallet.
1.Machine specification:
| I．Technical Parameter | |
| Sack width | 300-600 mm |
| Sack length | 410-910 mm |
|
Bottom width(B > 160 mm) |
80-180 mm |
| Bottom center distance | 310-680 mm |
| Main fabric cutting length | 510-1090 mm |
| Fabric width | 55-80cm |
| Coating Weight(15% PE, 85% PP) | 17-30 g/m² |
| Speed | 90-120 个/min |
| 2.Material Specification | |
| 2.1Tubular fabric requirement | |
| Material specification | 2.5-5 mm PP tapes |
| Fabric Weight | 55-80 g/m² |
| Coating Weight | 17-30 g/m² |
| Coating adhesion | Min. 8.1N/30mm |
| Width tolerance | ±7 mm |
|
Weight tolerance (fabric + coating) |
±3 g/m² |
| Over coating | Max. 5mm |
| 2.2Flat fabric for patches | |
| Fabric Weight | 55-80 g/m² |
| Coating Weight(15% PE, 85% PP) | 17-30 g/m² |
| Coating adhesion | Min. 8.1N/30mm |
| Width tolerance | ±3 mm |
|
Weight tolerance (fabric + coating) |
±3 g/m² |
|
Electrical,water,air requirement |
|
| Power | 105 KVA |
|
Water consumption (Max 18°C, 4 bar) |
2m³/h |
| Operating pressure | 6-7 bar |
| Air consumption | 120 m³/h |
| Air compressor | Prepared by customer |
| 4. Space requirements | |
| Equipment Size | L*W*H: 12 m×7.5 m×3m |
| Ground strength |
The installation place must keep the ground flat and have enough bearing pressure. The foundation should not conduct vibrations generated during operation. The permissible ground load must not be lower than 25000 N/m2 |
| Environment temperature |
The equipment should not be installed outdoors! The ambient temperature in production halls and warehouses must be between 18 °C and 40 °C! |
2.Cooling water requirements
To minimize water consumption, Seller recommends a closed cooling water system with an air-cooled water chiller.
The water used for filling the system and for the production process (if any) has to be free from impurities
(corrosive particles, suspended matter, etc.). Furthermore, it has to meet the following requirements:
The process water must be free from:
- visible impurities such as suspended or turbid matter
- biological impurities such as bacteria, algae, or mucilage
- fats, oils, or other aliphatic or aromatic compounds
- fluorinated or halogenated substances such as refrigerant R131 or the like
- or other substances which may affect the material to be pelletized or the components of the line
3.Production process
4.Valve sack bag samples
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.