155 Degree F Class DM Insulation Material Stator Slot Insulation Paper
155 degree F class DM Insulation Material Stator slot Insulation Paper
DM insulation paper material characteristics and uses:
DM insulation paper is a two-layer soft composite material bonded by polyester film and polyester fiber non-woven fabric;
Heat resistance grade F;
Has excellent mechanical properties, dielectric properties and adhesive properties;
It is suitable for slot insulation, inter-turn insulation and pad insulation in motors and electrical appliances.
Precautions when installing motor insulation paper
The correct orientation of the smooth side of the motor insulation paper can improve the insulation performance of the motor and protect the motor casing and windings, which is crucial for the normal operation of the motor. During the installation process of motor insulation paper, you must pay attention to the following points to ensure the quality of motor insulation paper and installation quality and ensure the normal operation of the motor.
1. The motor insulation paper must be inspected before being installed on the motor. If the motor insulation paper is found to be wrinkled or damaged, it must be replaced in time.
2. Before installing the insulation paper on the motor, the motor and windings need to be cleaned. If there are impurities such as oil or dust, it will affect the normal operation of the motor.
3. After the motor insulation paper is installed, the motor needs to be tested for insulation to ensure that the motor’s insulation performance meets the requirements.
Motor Insulation paper Product parameters:
| Parameter name | Unit | parameter | |||||||||||
| Insulation paper thickness | mm | 0.13 | 0.15 | 0.17 | 0.20 | 0.22 | 0.24 | 0.26 | 0.28 | 0.30 | 0.36 | 0.42 | 0.48 |
|
Quantitative and deviation |
gsm | 143±14 | 162±16 | 182±18 | 217±22 | 252±25 | 287±29 | 322±32 | 357±36 | 377±38 | 462±46 | 532±53 | 602±60 |
|
film thickness |
mm | 0.025 | 0.036 | 0.050 | 0.075 | 0.100 | 0.125 | 0.150 | 0.175 | 0.190 | 0.250 | 0.300 | 0.350 |
| Breakdown voltage | KV | ≥5 | ≥7 | ≥9 | ≥11 | ≥12 | ≥12 | ≥13 | ≥15 | ≥16 | ≥20 | ≥22 | ≥23 |
| Breakdown voltage after bending | KV | ≥5 | ≥7 | ≥8 | ≥10 | ≥11 | ≥11 | ≥12 | ≥14 | ≥15 | ≥18 | ≥20 | ≥22 |
| Tensile strength (longitudinal) | N/CM | ≥120 | ≥140 | ≥140 | ≥180 | ≥220 | ≥240 | ≥260 | ≥270 | ≥280 | ≥340 | ≥380 | ≥410 |
| Tensile strength (lateral) | N/CM | ≥80 | ≥100 | ≥110 | ≥150 | ≥190 | ≥210 | ≥230 | ≥250 | ≥260 | ≥300 | ≥340 | ≥370 |
| Elongation (longitudinal) | % | ≥15 | ≥20 | ||||||||||
| Elongation (lateral) | % | ≥20 | ≥20 | ||||||||||
| Normal adhesion |
Not layered
|
||||||||||||
| Hot adhesion | Not layered,No foaming, No glue (200±2°C, 10min) | ||||||||||||
Motor Insulation paper picture show
Information needed for insulation material inquiry
It will be better if customer could send us detailed drawing including below information.
a. Insulation material type: insulation paper, wedge, (including DMD,DM, polyester film, PMP,PET, NHN , NMN ,PM ,Red Vulcanized Fiber,)
b. Insulation material dimension: width, thickness, tolerance.
c. Insulation material thermal class: Class F, Class E, Class B, Class H , Class C
d. Insulation material applications
e. Required quantity: normally its weight
f. Other technical requirement.
About Motor component and accessories
NIDE can supply the full range of electric motor components such as commutator, ball bearing, thermal protector, carbon brush, insulation paper, shaft, magnet, fan, motor cover,etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.