Introduction

The 6641 DMD mylar polyester film electrical insulation material is a three-layer composite material made of one layer of polyester film and two electrical polyester fibre nonwovens and glued by F class resin. With good mechanical property and electrical property, polyester non-woven fabric has good adsorption capacity and can absorb resin during impregnation.

Application

It is widely used in slot, phase and liner insulating of motors,Interlayer insulation in the transformer. It is also widely used in automatic coil inserting machine for wedge inserting.

Specification

Thickness : 0.13mm-0.50mm

Sheet: 1000*980mm

Coil: maximum width 1000mm

Strip: minimum width 5mm

Thermal class : F

Working temperature: 180 degree

Color: Blue

Normal Bond strength: no delamination

Bond strength at 180±2°C: No delamination, no blister, no adhesive flow

Package

Inner packaging: polyethylene film

Outer packaging: carton or woven bag

Storage conditions

Can be stored indefinitely under normal conditions (20°C, 50% r.h.)

Picture show

Information needed for insulation material inquiry

It will be better if customer could send us detailed drawing including below information.

1. Insulation material type: insulation paper, wedge, (including DMD,DM, polyester film, PMP,PET,Red Vulcanized Fiber)

2. Insulation material dimension: width, thickness, tolerance.

3. Insulation material thermal class: Class F, Class E, Class B, Class H

4. Insulation material applications

5. Required quantity: normally its weight

6. Other technical requirement.