Heating Juice Drink Dispenser 9L With 3 Tanks Innoxious
CE Certificate Stainless Steel Drink Beverage Cold Hot Juicer Drink Juice Dispenser
Konmax Cold Drink Dispenser Description:
2.High quality compressor lead to cooling & heating fast and stable( cooling & heating during 25—45mins)
3.juicer dispenser machine with stainless iron panel complete mirror design
4.All the part inside cold-hot juice machine welding by copper tube , in order to Avoid rust
5.cold drink machine divided into cool & hot , cooling only ,
6.mixing and Spraying design
7.One , two and three tank to choose
8.The tank is made of PC (Polycarbonate) material which is high/low temperature resistance, unbreakable, innoxiously, antifoaming, good flexibility and removable.
10.Cold drink machine is low noise ,cooling fast.
Hotel ,restaurant,store , supermarket,drink bar etc
Konmax Cold Drink Dispenser Specification:
| Material | Stainless steel R304 | Machine size | 410*390*670MM |
| power | 280/800W | Packing size | 490*450*700MM |
| Cold-beverage temperture | 7 to 12 degree | Hot-beverage temperature | 52 to 58 degree |
| Tank material | PC | Model | LSJ 9 L X3 |
| Condenser | with Copper tube | Certificate | CE |
| switch | LCD switch | Packing Way | Carton +foam inside |
| Electrics Standard | 110V-220V,50-60HZ | Drive Mode | Magnetic rotating |
| G.W | 29KG | N.W | 27KG |
| 40' HQ loading | 520PCS | FOB Shanghai | USD |
| 20' FT loading | 210PCS | Warranty | 1 Year |
Konmax Cold Drink Dispenser Detailed Photo:
Konmax Cold Drink Dispenser Factory show:
Konmax Cold Drink Dispenser Application Photo:
Konmax Cold Drink Dispenser Installing Methods:
1: To install it ,pls choose the site which is flat,fixable and can avoid the direct sunshine in sunmmer.
2:Around the juicer, should have 150mm up room to make the air circulating and make sure the machine can run effectively.
3:Before installing, pls check the supply whether confirm the requirements or not. The power supply cable is not too thin or too long. The cross section of cable should be 1.5-2.5mm, Voltage is mounted on the fixed position with fuse which will keep the users safety,it must have reriable grounding. The socket should be mounted on the fixed position with fuse which keep the machine running safety.
4;To make the fix position for juicer,should make its frond lower and back higher(to ajust the foot of bottom can do it), then the water in the salver can flow into the box through the hose.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.