Automated In Line PCB Routers YSATM-4C For SMT Production Line Size1680*1298*1700mm
1.Features:
• In-Line Automatic PCB Separator can loading, Cutting , unloading automatically, meet the needs of automatic factory.
• It can adjust width and receive PC board automatically. Meanwhile, it can identify the finished PCB board and waste automatically after cutting, save labor costs.
• Equip high-speed CCD with automatic vision alignment system at set, great improve the precision of cutting and operation efficiency.
• Use high-speed main shaft to cut PCB, less cutting stress, high precision, and apply to any form of PCB.
• Dual tables motion could carry out PCB cutting and placing at the same time, improve operation efficiency.
2.Advantages:
1. Using double slide into place device, reduce the cutting waiting times, increase production capacity.
2. Avoid artificial flap caused by the cracking of tin and part damage and other issues.
3. Avoid using blunt or fold, produced by mechanical stress.
4. Suitable for the finished plate arc and line cutting.
5. Suitable for small pieces of the final cutting, base plate of a mobile phone, PDA, PC interface card and so on.
3.Operational Vision:
• Diagrammatic window operating pages, easy to learn and operate.
• Directly edit the cutting programming on screen.
4.Speficications:
| Pick and discharge robots | With automatic rotation function, more convenient and accurate. |
| Nozzle signal method | Adopt 6-point independent control signal mode to prevent drop board and detailed alarm. |
| Architectural advantages | Adopting self-consistent and self-contained methods, the follow-up maintenance is more convenient and economical. |
| LED aperture requirements | LED aperture brightness can be adjusted in software |
| Camera | Software controlled camera moves up and down |
| PCB positioning and adjustment methods | Special fixture. |
| Milling cutter diameter range | 0.8-3.0mm |
| Milling cutter management | The software can automatically adjust the height according to the thickness of the PCB board and the toughness length of the cutter to extend the service life of the cutter and standard tool detection. |
|
Tool Management |
Equipped with broken knife detection function. |
| Equipped with retracting detection function | |
| Equipped with automatic tool change function, adopts visual tool change system to prevent reversal. | |
| MES docking | Open MES docking port function |
| BAR CODE scan | Open BAR CODE Scan Port Function |
| Cutting speed | 0-100mm/S adjustable per second |
| Working table | two worktables |
| Cutting function | Can cut straight, curved, L-shaped, U-shaped |
| Trouble shooting | Software can detect failure points, have I/O port detection capabilities, and have detailed alerts |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.