Drill Pipe - T3/TH60 & T4 & RD20 drills with IR/AC/Schramm Style

Model No :

Drill Pipe - T3/TH60 & T4 & RD20 Style

Rosdrill same spec with Generic Manufacture

Description

Rosdrill has all the same spec with these manufactures:

1) Ingersoll-Rand Style Drill Pipe

2) Atlas Copco Style Drill Pipe

3) Schramm & Style Drill Pipe

4) Gefco Style Drill Pipe

Models:

1. T3/TH60 Drill Pipe (20' X 4 1/2" OD X 3 1/2" or 2 7/8" IF or Regular)

2. T3/TH60 Drill Pipe (20' X .368 OD X 2 3/8" IF & Regular)

3. T4 Drill Pipe (25' X 4 1/2" OD X 3 1/2" or 2 7/8" IF or API)

4. T4 Drill Pipe (25' X .368 OD X 2 3/8" IF & API)

5. T4 Drill Pipe (25' x 5-1/2" OD) BH drilling pipe

6. RD20 / T130 style Drill Pipe (30' X 4 1/2" OD X 3 1/2" or 2 7/8" IF or Regular)

7. Note: Steel or Aluminum grade options - note: Aluminum is lighter but cost more

8. Note: Tube is a Grade D., alloy is 4140/4155 heat treated and quench tempered is the standard

9. Note: (110) at 20'x4-1/2" OD or (100) at 25'x4-1/2" OD and (90) at 30'x4-1/2" OD drill pipe max can be loaded in a 40' ft container. If 3-1/2" OD then more can be loaded depending on total weight allowed.

Features of Pipe Based Well screens

Excellent strength and resistance to deformation: The base pipe inside, the outside can be protected with the protection jacket added according to requirements, the integrated strength of the perforated base pipe only decreases 2-3% compared with the standard casing/oil tubing, so the pipe based well screens have enough integrated strength to resist to the pressure caused by strata. Even if some part of the well screens deformed, the slot of this part will not be widened, which makes higher sand control reliability.
 

Advise us on your typical application, and we can recommend Wall and Grade to match your needs.