Inconel 718 ASTM B637 ASME SB-637 Forging Solution 1700-1850 ℃ Round Bar UNS N07718 GH4169 Alloy Rod
Inconel 718 ASTM B637 ASME SB-637 Forging Solution 1700-1850 ℃ Round Bar UNS N07718 GH4169 Alloy Rod
Properties of Inconlel 718
Inconel 718 is a nickel-based super alloy that is well suited for applications requiring high strength in temperature ranges from cryogenic up to 1400°F. Inconel 718 also exhibits excellent tensile and impact strength.
Chemical Composition of Inconel 718
Typical chemical analysis of Inconel 718.
|
Element
|
Percentage |
| Carbon |
0.08 max |
| Manganese |
0.35 max |
| Phosphorus |
0.015 max |
| Sulfur |
0.015 max |
| Silicon |
0.35 max |
| Chromium |
17-21 |
| Nickel |
50-55 |
| Molybdenum |
2.80-3.30 |
| Columbium |
4.75-5.50 |
| Titanium |
0.65-1.15 |
| Aluminum |
0.20-0.80 |
| Cobalt |
1.00 max |
| Boron |
0.006 max |
| Copper |
0.30 max |
| Tantalum |
0.05 max |
| Iron |
Balance |
Resistance to Corrosion and Oxidation of Inconel 718
Inconel 718 has good resistance to oxidation and corrosion at temperatures in the alloy’s useful strength range in atmospheres encountered in jet engines and gas turbine operations.
Physical Properties of Inconel 718
Typical physical properties of Inconel 718 are summarized in the table below.
|
Solution Treated |
Solution Treated and Aged |
|
| Density |
0.296 lb/in3 (8.192 g/cm3) |
0.297 lb/in3 (8.22 g/cm3) |
| Specific Gravity |
8.19 |
8.22 |
| Melting Range |
2500-2600°F |
1370-1430°C |
Thermal Conductivity of Inconel 718
The thermal conductivity at various temperatures for Inconel 718 are given in the following table.
|
Temperature Range |
Co-Efficients |
||
|
°C |
°F |
W/m.K |
Btu.ft/ft2.hr.°F |
|
0-100 |
532-212 |
6.5 |
11.2 |
Mechanical Properties
The room temperature strength of the Inconel 718 alloy is substantially increased by precipitation heat treatment as the following data indicate. These values are properties specified for sheet, strip and plate in AMS 5596 and AMS 5597.
|
Yield Strength |
Ultimate Tensile Strength |
Elongation |
|
|
Sheet and strip |
80,000 psi (550 MPa) |
14,000 psi (965 MPa) |
30 (min) |
|
Plate |
105,000 psi (725 MPa) |
150,000 psi (1,035 MPa) |
30 (min) |
Solution trated plus precipitation heat treated.
|
Yield Strength |
Ultimate Tensile Strength |
Elongation |
|
150,000 (1,035 MPa) |
180,000 psi (1,240 MPa) |
12 (min) |
Related Stories
Typical short time tensile properties of Inconel 718 as a function of temperature are shown here for material solution treated and aged as follows:
- Solution Treatment: 1800°F (982°C) 1 hour
- Precipitation Treatment: 1325°F (718°C) 8 hours, Furnace Cool at 100°F (55°C) per hour to 1150°F (621°C) 8 hours
Standards
United Performance Metals Inconel 718 is supplied to AMS 5596/5597 and has a UNS designation N07718.
Applications of Inconel 718
Inconel 718 is typically used for:
- Jet engine
- Gas turbine operations
For sizes and availability of Inconel 718 contact United Performance Metals.
Source: United Performance Metals
For more information on this source, please visit United Performance Metals
Product details
Packing & shipping
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.