JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
                                                                                                           
Verified Supplier
28 Years
Since 1998
Menu

DIN 1.4477 X2CrNiMoN29-7-2 10 - 350mm Ss Round Bar

Price Negotiable
Price: 5 USD/KG
MOQ: 500KGS
Delivery Time: 7 days
Brand: Mittel
Product Description

DIN 1.4477 Stainless Steel Round Bar X2CrNiMoN29-7-2Stainless Steel Bar 10 - 350mm

 

EN 1.4477 stainless steel is a duplex stainless steel formulated for primary forming into wrought products. 1.4477 is the EN numeric designation for this material. X2CrNiMoN29-7-2 is the EN chemical designation.

It can have a fairly high tensile strength among wrought duplex stainless steels. In addition, it has a fairly low thermal conductivity and can have a moderately low ductility.

The properties of EN 1.4477 stainless steel include two common variations. This page shows summary ranges across both of them. For more specific values, follow the links immediately below. The graph bars on the material properties cards further below compare EN 1.4477 stainless steel to: wrought duplex stainless steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on

 

 

 

Chemical composition(mass fraction)(wt.%) of the 1.4477

 

C Si
Mn
P
S
Cr Ni Mo Other
≤0.030 0.50 0.80-1.50 0.030 0.015 28.0-30.0 5.80-7.50 1.50-2.60 N 0.30-0.40
Cu ≤ 0.80

 

 

Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade 1.4477
 

Yield
Rp0.2 (MPa)
Tensile
Rm (MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
165 (≥) 198 (≥) 21 34 14 Solution and Aging, Annealing, Ausaging, Q+T,etc 144

 

 

Grade informations

 

Grade : X2CrNiMoN29-7-2
Number: 1.4477
Classification: Austenitic-ferritic stainless steel - special grade
Density: 7.7 g/cm ³
Standard:
EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10297-2: 2005 Seamless circular steel tubes for mechanical and general engineering purposes. Stainless steel. Technical delivery conditions
EN 10088-1: 2005 Stainless steels. List of stainless steels
EN 10088-5: 2009 Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
EN 10088-4: 2009 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
Equivalent grades: No information

 

 

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company JIANGSU MITTEL STEEL INDUSTRIAL LIMITED
Location NO.288,YOUYI ROAD ,XI SHAN DISTRICT,WUXI CITY,CHINA
Contact Person Gao Ben

Request A Quote

Please check your email address.
Your message must be at least 20 characters.