Durable Advertising Parking Barrier Gate 24V BLDC Brushless Motor
New BLDC Brushless Motor Advertising Barrier Gate 24V Advertising Parking Barrier Gate
Our Advantages:
| 1. 3second to 8 second open/close time adjustable; |
| 2. Advertising DC brushless motor & 5 million MCBF; |
| 3. 5tension spring balance makes is heavy duty and more durable; |
| 4.Led lights with time swtich ,set a time for light on as you require; |
Technical Parameters:
| 1. Working temperature(motor): -30℃~+60℃ |
| 2. Rated Supply:24/100/240VAC,50/60Hz |
| 3. Running speed:1.2sec to 3Sec(adjustable) |
| 4. Rated power:160W |
| 5. Driving Method:Servo motor |
| 6. Humidity:≥85% |
| 7. Remote control distance:≤100M(open,sunny weather) |
Electrical installation, wiring diagram
1. The internal wiring of this machine has been completed when it leaves the factory, please do not change it,
just connect the 220V power supply and the protective ground wire to work.
2. Traffic light interface: 2A24V voltage traffic light use.
3. Infrared anti-smashing interface: external infrared anti-radiation device, and the switch signal of the anti-radiation
output can be connected.
4. Ground sense interface: support external ground sense. When using an external ground sensor, you only need
to connect the switch signal output by the ground sensor.
5. Parking system interface wire control interface: connect the switch signal from the system to this interface to
control the barrier.
6. Starting limit and landing limit signal output: output COM/NO/NC switch signal to the system to inform the
current state of the barrier.
7. RS485 or CAN communication interface: PC software can be used to manage more than 15 barriers
Controller wiring diagram
Function setting description:
When setting the function, please press the menu button on the control panel. The Nixie tube displays
H00-00 or H00-other numbers. We correspond to the function parameter table code to enter the required
function parameter setting. For example, H00-00 is the UP ARM speed adjustment, and then press the
confirm button Enter the parameter setting, the number will be displayed on the digital tube, then press
the up or down key to set the required UP ARM speed number, and then press the confirm button to
complete the ARM-up speed setting.The other function settings are the same as the example settings.
Arm length and speed comparison table
|
Menu code Parameter Arm length |
UP ARM | DOWN ARM | ||||
| H00-00 | H00-02 | H00-04 | H00-01 | H00-03 | H00-05 | |
| Medium Octagonal arm 3m 1.8s(without rubber) | 95 | 30 | 8 | 95 | 30 | 8 |
| Medium Octagonal arm 3m1.8s(with rubber) | 95 | 25 | 8 | 95 | 25 | 8 |
| Large Octagonal arm 4.5m 3s(without rubber) | 45 | 30 | 10 | 45 | 30 | 10 |
| Large Octagonal arm 6m 5s(with rubber) | 35 | 40 | 10 | 35 | 40 | 10 |
| 3m round arm 1.8s | 95 | 25 | 8 | 95 | 25 | 8 |
(the parameter is based on the company’s arm)
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.