Inductive DC12V/24V Loop Detector For Sliding Gate Motor
Inductive DC12V/24V Loop Detector For Sliding Gate Motor
Specifications:
| Brand name | Wonsun/ODM/OEM |
| Power supply | AC220V/110V,DC24V/12V |
| Reaction time | 100ms |
| Frequency range | 20KHZ to 170KHZ |
| Loop Inductance | Ideal: 80μH to 300μH (incl. conn. wiring) |
| Loop connection | <5m optimal |
| Loop connection wiring | Maximum length 200 meters Twisted at least 20 times per meter |
| Dimension | 37x74x85 mm (WxHxL) |
| Net Weight | 250g |
| Operating Temperature | -20°C to +70°C |
Detailed Images:
Work Indicator
Detector will enter into the self-calibration condition with the green LED flash, red LED extinguish once on power, this procession will last 1 second. .the vehicle should not on the loops within the self-calibration. The green LED will not flash, he red LED extinguish after self-calibration. When the vehicle past over the loop ,the red LED on.
DIP SWITCH and Wire Jumper
DIP1, 2 setting the sensitivity;set the presence output time of relay 1 by DIP3;set the relay2 as presence/pulse output by DIP4; the output time of presence signal set by DIP5;DIP6set the frequency; jumper wire connect to the open end, PIN16 connect to the NO of relay 1. Jumper wire connect to the close end, PIN16 connect to the NC of relay 1
Work Frequency
User can change the loop's work frequency which can avoid the cross talk by the adjacent loop or environment frequency. It offers two styles frequency, set by DIP6
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.