Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd
                                                                                                           
Verified Supplier
16 Years
Since 2010
Menu

80*45 Telescopic Arm Vehicle Barrier Gate For Underground Parking Lot

Price Negotiable
Price: USD200~250 per unit
MOQ: 1PC
Delivery Time: 3-7 working days after received your payment
Brand: WONSUN
Product Description

80*45 Telescopic Arm Vehicle Barrier Gate For Underground Parking Lot

 

Functions & Features
 

1)Open the barrier gate by motor wheel when power off and automatic locking when power on.
2)Balanced boom running with a motor transmission of cranks and shafts.
3)Well-intergrated with car parking system equipments,with wire control(must be switch signal)
4)Connector for traffic light(AC220v,power less than 40W)
5)Offering dry contact signal for car parking system.(COM,NC,NO)

 
 
Specification:

 

Model DZ-132
Working Temperature -35℃~+60℃
Voltage 220V±10%, 110V±10%, 50/60HZ
Rated power 80W
Relative humidity ≤90%
Remote control distance ≥30m
Capacitor 9+9uF/450W
Speed 1.8S,3S,6S
Max boom length 5meters
Remote Control 100m in the open place

 

 

Arm position adjustment.

 

2)First please set the arm horizontally and vertically through regulating nut to leangthen or shorten the connecting rod, and then tighten M12 safety nuts.

2)To make the arm well balanced, please adjust the M8*140MM spring regulating screw accordingly.

3)For barrier agte with double springs, please adjust the springs simultaneously.
 

 

Motor Speed and Boom Type:

 

Boom type Boom Length(M) Opening time(S) Height between boom and ground(M)
Straight boom 6M≥L>4.5M 6S H=0.8M
4.5m≥L>3M 3S
3m≥L 1.5S

Folding boom  

90 degree

5m≥L>3M 6S
3m≥L 3S

Folding boom

180 degree

 

5m≥L>3M 6S
3m≥L 3S

Fence Boom

Two-level

5m≥L 6S H=0.9M

Fence boom

Three-Level

m≥L 3S H=1.5M


 
Selection of spring.

 

Spring type Diameter Spring Length
Small size 4.5MM 280MM
Medium size 5.5MM 280MM
Big size 6.5MM 280MM
 
 

 
 
Our Service :
 
1. Our Factory has 8 years OEM/ODM experiences in the line of  barrier gate .
2. Prompt delivery time. Usually we keep stock of standard model which ensure the prompt delivery.
3. We accept OEM/ODM orders to meet the requirements of clients.
4. Trial order is acceptable. Clients can buy sample and test it before bulk order.
5. Online technical support makes it carefree to be our business partner.
6. A variety of transportation for your choice. Sea shipment, air cargo or express, depends on your demand.
7. Factory can be visited on working days. Clients are warmly welcome to visit our factory.
 
 
FAQ:
 
1. When barrier finish closing, why does the arm open itself slowly?
 
  • the spring is too tight, you need release the spring a little, then test it again.
  • see whether the main crank touch the triangle tightly or not, if tightly, adjust it.
  • reset the balance position and the electrical limit switch.

2. Why does the controller panel operate with "Di Di Di" abnormal noises?

  • As for this, it means the resistance on controller board is broken, if you have professional tools to check,
  • then replace that broken resistance, if not, replace that controller panel.

3. Why does the barrier finish half operation of opening and closing?

  • If uses our controller panel, you only need to find resistance R37 on controller panel, and repalce it is ok.

4. When barrier closed, why is there a 5 degree angle of inclination?

  • the model is not good, and the gear doesn't fit each other tightly.
  • the barrier didn't adjust well, need to reset.

 
5. When barrier finish open, but it closes itself without any order control, what's the problem?

  • To check the loop cable first, because the loop cable maybe brokem
  • To check the motor sensor, if it is not set well, then reset it in the middle between two holes on sensor rod.

6. Why does the arm wave a lot when opening and closing?

  • The spring is very tight
  • The Screw touches the rubber absorption tightly, need to reset again.

7. Rubber linning installation suggestion:

  • It is good use for fast speed, like 0.6s, 1s, 1.8s and 3s.
  • The place with many vehicles come and go, like shopping center, carpark area.

8. Can you accept OEM/ODM order?

  • Absolutely, we are manufacturer of barrier gate, with 7 years researching and developing experience.

 

Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype:SueZhang729
Whatsapp:+86 158 7925 9831

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd
Location 1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China
Contact Person Keira

Request A Quote

Please check your email address.
Your message must be at least 20 characters.