Heavy Duty Automatic Boom Barrier RS485 24VDC Brushless Motor With Two Fence Boom
Heavy Duty Automatic Boom Barrier RS485 24VDC Brushless Motor Parking Boom Barrier With Two Fence Boom
Automatic Boom Barrier Specification:
|
Working temperature(motor): |
-30℃~+70℃ |
|
Rated voltage: |
DC24V |
|
Running speed: |
1.5s-8s |
|
Rated power: |
160W |
|
Remote control distance: |
≤100M(in the open place) |
|
Max length of arm: |
6M straight arm or telescopic arm |
| Rated current | 9.5A |
| Rated torque | 59.6N.m |
Automatic boom barrier Advantages:
1. Speed adjustable from 1.5s to 6s
2. Arm direction change left or right
3. New design of antiskid device to make sure the safety.
4. All components of machine core upgraded to precision cast steel.
5. Auto-delay when closing(adjustable)
6 RS485 or CAN network communication interface(no need to install module)
7 Counting interface
8 24V backup battery interface(Can be charged by using solar energy)( optional)
9 Arm open when power off ( add backup battery) (Optional)
10 Anti-collision alarm device( optional)
Function setting parameter table
| Menu code | Parameter Scale | Parameter name | Default | Unit | Remark |
| H00-00 | 25-95 | Open speed adjustment | 40 |
Corresponding PWM duty |
|
| H00-01 | 25-95 | Close speed adjustment | 40 |
Corresponding PWM duty cycle |
|
| H00-02 | 5-40 | Open in place decelerate angle | 35 |
The larger the angle value, the |
|
| H00-03 | 5-40 | Close in place decelerate angle | 35 |
The larger the angle value, the |
|
| H00-04 | 1-20 | Open accelerate adjustment | 1 | ms |
The smaller the number, the |
| H00-05 | 1-20 | Close accelerate adjustment | 8 | ms |
The smaller the number, the |
Fault code:
| EFF01:Hall error | Check motor or wiring connection |
Generally, the motor or motor |
| EFF02.Under-voltage fault | The voltage is lower than 22.0V |
Power supply or the battery |
| EFF03.Over current protection |
The load is too heavy or the drive |
Check whether the motor |
|
EFF04.Locked rotation |
The limit has not been reached in place |
Reset the limit point, or |
Electrical installation, wiring diagram
1. The internal wiring of this machine has been completed when it leaves the factory, please do not change it,
just connect the 220V power supply and the protective ground wire to work.
2. Traffic light interface: 2A24V voltage traffic light use.
3. Infrared anti-smashing interface: external infrared anti-radiation device, and the switch signal of the
anti-radiation output can be connected.
4. Ground sense interface: support external ground sense. When using an external ground sensor, you
only need to connect the switch signal output by the ground sensor.
5. Parking system interface wire control interface: connect the switch signal from the system to this interface
to control the barrier.
6. Starting limit and landing limit signal output: output COM/NO/NC switch signal to the system to inform
the current state of the barrier.
7. RS485 or CAN communication interface: PC software can be used to manage more than 15 barriers.
Automatic Barrier Gate FAQ:
Q1.Who we are?
We are based in Shenzhen,Guangdong, China, was founded in 2011,is the professional manufacturer
of high-end intelligent parking barrier gate.
Q3.How about payment terms our company provide?
A: T/T
Q4.Which is your min order?
A: 1 piece
Q5.Model color size and craft for all barrier gates can be customized?
A: Yes, we can, welcome OEM & ODM. We also can put logo of your company on product
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.