Ethernet XFP Transceiver Data Rate 10G Full Duplex LC connector

This XFP transceiver is a high performance, cost effective module for serial optical data communications applications specified for signal rates of 11.2Gbps,with transmission distance from 300m up to 80km.This fiber optic transceiver typically operate at optical wavelengths of 850 nm, 1310 nm or 1550 nm. And main applications include 10 Gigabit Ethernet, 10 Gb/s Fibre Channel, Synchronous optical networking (SONET),Data Center and other telecommunication transmission systems.It is compliant with the 10G Small From-Factor Pluggable (XFP) Multi-source Agreement(MSA).

The XFP is a compact, hot-pluggable transceiver used for both telecommunication and data communications applications. The form factor and electrical interface are specified by a multi-source agreement (MSA). It interfaces a network device motherboard (for a switch, router, media converter or similar device) to a fiber optic or copper networking cable.

General information

Supports 9.95Gb/s to 10.5Gb/s bit rates
Power dissipation < 2W
Full Duplex LC connector
Maximum link length of 80km
Commercial temperature rang -40 ℃ to 85 ℃(optional)
No Reference Clock required
Standard bail release mechanism
RoHS Compliant Products Available 

Features
Maximum link length of 300m (50um,MMF,2000MHz.Km)
850nm VCSEL laser and PIN receiver
XFP MSA Rev 4.5 Compliant
No reference clock required
+1.8V,+3.3V Supply Voltage
Low Power Dissipation 1.5W Maximum
XFI and lineside loopback Mode Supported
0ºC to 70ºC Operating Case Temperature
Diagnostic Performance Monitoring of module temperature,
Supply Voltages, laser bias current, transmit optical power, and receive optical   power
RoHS compliant
 

Applications
10GBASE-SR/SW 10G Ethernet
1200-Mx-SN-I 10G Fiber Channel
Other optical links

Specifications

Fiber Optic Transceiver, Optical Fiber Transceiver, X2 Transceiver, SFP Transceiver