One Direction Overspeed Governor Bidirection Overspeed Governor For MRL Elevator

PRODUCT FEATURES

1. This overspeed governor is one way, and for MR elevator
2. Using with one way safety gear together

Type	SN-SG-XSQ115-02
Specification	Rated speed:0.25~2.5(m/s) Hoisting height:≤110(m) Sheave pitch:Φ240(mm) Wire rope diameter:8(mm) Rope pulling force:1000~2000(N) Overspeed switch voltage grade:DC110 or AC220(V)

PRODUCT FEATURES

Bidirection overspeed governor for MRL elevator

1. Using with bidirectional safety gear together
2. With mechanical remote reset and trigger function

G table	Sheave pith D(mm)	Wire rope diameter(mm)	Rated speed(m/s)
G01	Φ200	Φ6	0.5~1.0
G02		Φ6.3
G03	Φ280	Φ8	1.0
G05	Φ305		1.25~1.75
Overspeed switch voltage grade		Tripping solenoid voltage	Solenoid voltage of overspeed switch
DC110 or AC220		AC220	AC220

FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.