TANKII Factor Stainless Steel Wire 304 SS /Ta-fa 80T Welding Wire
Price:
3USD/KG
MOQ:
15KG
Delivery Time:
10DAYS
Brand:
TANKII
Product Description
Basic Info.
Model NO.
304 SS /Ta-fa 80T
Carbon Content
Low Carbon
PCD
HRB 95-100
ET
0
Hole
0
Typical Hardnedd
HRB 95-100
Bond Strength
4650 psi
Deposit Rate
10 lbs/hr/100A
Deposit Efficiency
75%
Transport Package
15kg/Spool, Carton, Wooden Case
Specification
1/16′′, 1.6mm
Trademark
TANKII
Origin
Shanghai, China
HS Code
75052200
Production Capacity
5000 Tons/Year
Product Description
Stainless Steel Wire 304 SS Thermal Spray Wire
Product Introduction:
304 stainless steel wire sprcifically designed for arc spraying. It produces a dense, well-bonded coating with excellent machinability and wear and corrosion resistance. 304 stainless steel is widely used for machine element repair, dimensional restoration and wear resistance applications. It has relatively high shrink characteristics and should not be used for coatings over 0.075 inches thick.
Surface Preparation:
Surface should be clean, white metal, with no oxides(rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning.
Recommended methodof preparation is to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.
Chemical Compositin:
Typical Characteristics:
![TANKII factor Stainless Steel Wire 304 SS /Ta-fa 80T welding wire]()
![TANKII factor Stainless Steel Wire 304 SS /Ta-fa 80T welding wire]()
![TANKII factor Stainless Steel Wire 304 SS /Ta-fa 80T welding wire]()
![TANKII factor Stainless Steel Wire 304 SS /Ta-fa 80T welding wire]()
![TANKII factor Stainless Steel Wire 304 SS /Ta-fa 80T welding wire]()
![TANKII factor Stainless Steel Wire 304 SS /Ta-fa 80T welding wire]()
Product Introduction:
304 stainless steel wire sprcifically designed for arc spraying. It produces a dense, well-bonded coating with excellent machinability and wear and corrosion resistance. 304 stainless steel is widely used for machine element repair, dimensional restoration and wear resistance applications. It has relatively high shrink characteristics and should not be used for coatings over 0.075 inches thick.
Surface Preparation:
Surface should be clean, white metal, with no oxides(rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning.
Recommended methodof preparation is to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.
Chemical Compositin:
| Cr | Ni | Mn | Si | Fe |
| 19.0 | 9.3 | 2.0 | 1.0 | Bal. |
Typical Characteristics:
| Typical Hardness | HRB 95-100 |
| Bond Strength | 4650 psi |
| Deposit Rate | 10 lbs/hr/100A |
| Deposit Efficiency | 75% |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shanghai Tankii Alloy Material Co.,Ltd
Location
1900 Mudanjiang Road, Baoshan District, 201999, Shanghai, China
Contact Person
Martin Lee