E11c Soft Precision Alloy Magnetic Alloy Tube 1j79 Permalloy 79HM Alloy Tube Silver
1J79/ Permalloy tube/ E11c tube 79HM alloy
Classification: precision soft magnetic alloy
Supplement: Alloy with high permeability in weak fields at saturation induction 0.65-0.75 T. Alloy 1J79/ permally high squareness of the hysteresis loop and a low coefficient of magnetization reversal
Application: For small cores of transformers, chokes and relays operating in weak fields, magnetic shields. In the small thickness (0.05 ± 0.02 mm) - cores for pulse transformers, magnetic amplifiers and solid state relays
Chemical Composition,%:
Ni 78.5 - 80% |
Fe 13.73 - 16.8% |
C 0.03% |
Si 0.3 - 0.5% |
Mn 0.6 - 1.1% |
S o 0.02% |
P 0.02% |
Mo 3.8 - 4.1% |
Ti 0.15% |
Al 0.15% |
Cu 0.2% |
Basic physical constants and mechanical properties of the alloy:
Density: γ = 8,6 g / cm3;
Electric resistivity: ρ = 0,55 ohm mm2 ? / m;
The temperature of the Curie point: Θs = 430 ° C;
Saturation magnetostriction: λS = 2 ? 106;
Brinell hardness of 210/120 HB;
Ultimate: RM = 1030/490 MPa;
Yield strength: σ0,2 = 980 145 MPa;
Modulus of elasticity E = 210 kN / mm2;
Elongation: δ5 = 3/50%;
Relative compression: φ = -%.
Heat treatment of the alloy
| Annealing | Temperature and heating rate | Holding time, h | Cooling mode |
| Vacuum with a residual pressure not higher than 10-3 Torr. Art. or pure hydrogen with a dew point of not higher than minus 40 ° C. | (1125 ± 25) ° C not higher than 500 ° C / h | 3-6 | to 600 ° C at a rate not exceeding 200 ° C / h from 600 to 200 ° C at a rate of at least 400 ° C / h |
The magnetic properties of the alloy
| Type | Class | Thickness or diameter, mm | Initial permeability | Max. permittivity | Coercive force | Technical saturation induction | |||
| mH / m | G / E | mH / m | G / E | A/m | E | (10-4 G) | |||
| no less | no more | no less | |||||||
cold-rolled strips |
1 |
0,005 | 8,8 | 7000 | 38 | 30000 | 8,0 | 0,10 | 0,75 |
| 0,01 | 17,5 | 14000 | 75 | 60000 | 5,6 | 0,07 | |||
| 0,02 | 20 | 16000 | 88 | 70000 | 4,0 | 0,05 | |||
| 0,05 0,08 |
20 | 16000 | 110 | 90000 | 3,2 | 0,04 | |||
| 0,10 0,15 |
25 | 20000 | 150 | 120000 | 2,4 | 0,03 | |||
| Cold rolled sheets and strips | 0,20 0,25 |
28 | 22000 | 160 | 130000 | 1,6 | 0,02 | ||
| 0,35 0,50 0,8 1,0 |
31 | 25000 | 190 | 150000 | 1,6 | 0,02 | |||
| 1,5 2,0 2,5 |
28 | 22000 | 160 | 130000 | 1,6 | 0,02 | |||
| cold drawn wire hot rolled sheets |
0,05 0,10 |
6,3 | 5000 | 50 | 40000 | 6,4 | 0,08 | ||
| 3-22 | 25 | 20000 | 100 | 80000 | 3,2 | 0,04 | |||
| Bar | 8-100 | 25 | 20000 | 100 | 80000 | 3,2 | 0,04 | ||
| cold-rolled strips | 2 | 0,005 | 12,5 | 10000 | 44 | 35000 | 6,4 | 0,08 | 0,73 |
| 0,01 | 20 | 16000 | 110 | 90000 | 3,2 | 0,04 | |||
| 0,02 | 25 | 20000 | 125 | 100000 | 2,4 | 0,03 | |||
| 0,05 0,08 |
25 | 20000 | 150 | 120000 | 1,6 | 0,02 | |||
| 0,10 0,15 |
28 | 22000 | 190 | 150000 | 1,2 | 0,015 | |||
| 0,20 0,25 |
31 | 25000 | 230 | 18000 | 1,2 | 0,015 | |||
| 0,35 0,5 0,8 1,0 |
38 |
30000 |
280 |
220000 |
1,0 |
0,012 |
|||
| 1,5; 2,0 | 31 | 25000 | 230 | 180000 | 1,2 | 0,015 | |||
| cold-rolled strips | 3 | 0,01 | 25 | 20000 | 150 | 12000 | 2,4 | 0,03 | 0,73 |
| 0,02 | 31 | 25000 | 190 | 150000 | 1,6 | 0,02 | |||
| 0,05 | 38 | 30000 | 250 | 200000 | 1,2 | 0,015 | |||
| 0,10 | 38 | 30000 | 250 | 200000 | 1,2 | 0,015 | |||
| 0,20 0,25 |
38 | 30000 | 280 | 220000 | 1,0 | 0,012 | |||
| 0,35 | 44 | 35000 | 310 | 250000 | 1,0 | 0,012 | |||
Alloy 1J79/ permalloy strip, you can order from us in the best conditions.
If you are interested in our products, please contact with me
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.