0.3mm*25mm Chromel Alumel Thermocouple Strip For Flat Pin Spade Terminal
K Type Thermocouple Alloy Strip 0.3mm*25mm Chromel Alumel Strip With Bright Surface Used For Flat Pin Spade Terminal
Quick Description
A typical thermocouple construction consists of a pair of dissimilar metals that are electrically joined together at the sensing point and connected to a voltage measuring instrument at the other end. When one junction is hotter than the other, a thermal “electromotive” force (in millivolts) is produced that is roughly proportional to the difference in temperature between the hot and cold junctions.
Thermocouple alloys have been engineered for use between the point of sensor and the cold junction compensation (cjc) where the signal is received and measured.
Thermocouple strips are available in either round wire or flat ribbons, produced to customer specification.
Our products conform to the standards of IEC584.
2. Aluminum industry
3. Food and Pharmaceutical
4. Forgings
5. Glass, Ceramics, Clay Tiles, Bricks
6. Heat Treating
7. Petroleum, Downhole Oil & Gas
8. Sensor Manufacturing
9. Steel industry
10. Utilities Power Generation
| Tankii Product | Thickness Range | Width Range | Specification | Available Grades |
| Thermocouple Strip |
From 0.05mm(flat wire) From 0.1mm (strip) |
up to 200mm |
As per ASTM E230 As per IEC 584-3 |
Type K Type T Type N |
Application in Themrocouple connector:
Contacts in connects:
Usage as Thermocouple Spade
Product picture:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.