Inconel 625 Nickel Alloy Welding Wire 1.2mm Thermal Spray Wire for Corrosion Resistance
Alloy 625 Nickel welding wire Inconel 625 Nickel based alloy wire Thermal Spray Wire For FLAME SPRAYING
Application:
Inconel 625 wire
Oxidation and heat resistant coatings
Corrosion resistance
Digesters
Chemical composition:
| Alloy | % | Ni | Cr | Mo | Nb+N | Fe | Al | Ti | C | Mn | Si | Cu | P | S |
| 625 | Min | balance | 20 | 8 | 3.15 | |||||||||
| Max | 23 | 10 | 4.15 | 5 | 0.4 | 0.4 | 0.1 | 0.5 | 0.5 | 0.5 | 0.015 | 0.015 |
| Density | 8.4 g/cm³ |
| Melting point | 1290-1350°C |
Introduction:
Inconel 625 wire is a high purity nickel chrome wire specifically designed for arc spraying. It produces dense, well-bonded coating with resistance to corrosion, and stress cracking in caustic mediums.
Surface Preparation:
Inconel 625 wire
Surface should be clean, white metal, with no oxides(rust), dirt, grease, or oil on the surface to be coated. Note: It is best not to handle surfaces after cleaning.
Recommended method of preparation is to grit blast with 24 mesh aluminum oxide, rough grind, or rough machine in a lathe.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.