1650nm FTTH FBG Optical Reflector

The FBG reflector is a standard SC type connector structure, which package a special FBG in the ceramic ferrule.

The fiber bragg grating reflector is a low-cost specific band reflector mounted on
the optical network unit (ONU) side. It can reflect light pulses (1650 +/- 5nm) from the OTDR on the fiber line terminal (OLT) side nearly 100%, while the working bands of the passive optical network (PON) are transmitted normally.

The OTDR can determine whether the fiber line is normal by detecting the signal reflected by the fiber grating reflector. When the reflected signal is lower than the normal value, the line loss is too large; when the reflection value is 0, the optical fiber line is broken.

Therefore, we can maintain the fiber line in time by the real-time monitoring of the fiber line.

Features:

1. Pass 1310+1550nm and Stop 1650nm;
2. Grating embedded in the fiber, free from environmental pollution;
3. Reflectance is high for bands that need to be blocked (above 99.5%), close to total reflection;
4. The wavelength of the reflection band is controlled accurately (1643.5nm ~ 1656.5nm);
5. The band pass edge of the transition zone is very narrow (less than 2nm), if pass this area, it is all-pass;
6. Standard common adapter structure, easy connection;
7. High reliability, long life span,RoHS compliance;
8. Telcordia GR-326-CORE and Telcordia GR-1221-CORE

Specification:

Application:

• Detection and maintenance of Passive Optical Network lines (applied to FTTx).