High Density MTP MPO cable - LC 12 Core Hydra Cable Assemblies Male Connectors With Guide Pins
High Density MTP MPO cable - LC 12 Core Hydra Cable Assemblies Male Connectors With Guide Pins MTP MPO cable patch cord
MPO to SM/MM Fan-out/Breakout Harness Cable assembly is mainly used for 10G/40G/100G, the LC harness cable with 0.9mm branch cable, the LC side could adopts uniboot/single boot duplex LC or dual boot duplex LC connector. The harness MPO cable supports both type A and Type B. Different lengths available.
MPO Cable-LC 12 core hydra cable is optimized for 40G QSFP+,10G SFP, 400G OSFP QSFP optics connection and high-density data center application
The choice of the supports higher speed Ethernet and Fiber Channel applications (OM3, OM4 and OS1/OS2 fibers), and applications with legacy multimode fiber (OM1 or OM2).
MPO Male (with guide pins) assembled with 0.9mm cable to single-fiber connectors.
All types of single-fiber connector interface available for choices (SC, LC, E2000, MTRJ, etc.)
MTP to LC Breakout Cable Application
For installing inside MPO fiber cassette module
MTP MPO Fiber Breakout Cable Optical properties
Item | Unit | Parameters | |||||
Connector | -- | SM standard | SM elite low | MM standard | MM elite low | ||
IL | Typical | (dB) | 0.35 | 0.20 | 0.35 | 0.20 | |
Maximun | (dB) | 0.75 | 0.35 | 0.60 | 0.35 | ||
RL | (dB) | ≥60 for APC (8 Angle Polish) | ≥20 for PC | ||||
(dB) | ≥50 for PC | -- | |||||
Female / male | (dB) | Male: With Pins, Female: Without Pins | |||||
Tensile strength | (dB) | ≤0.3 (Max 66N) | |||||
Vibration | (dB) | ≤0.3 (10 ~ 55Hz) | |||||
Temperature cycle | (dB) | ≤0.3 (-40 ~ 75℃, 21Cycles) | |||||
Fiber MPO Connector End face parameters
Item | Unit | Parameters | |
SM | MM | ||
X curvature radius | (mm) | Min 2000 | |
Y curvature radius | (mm) | Min 5 | |
Fiber height | (nm) | 1000 ~ 3500 | |
overall optical height difference | (nm) | MAX: 500 | |
adjacent fiber height difference | (nm) | MAX: 300 | |
X axis angle | ( ° ) | -0.2 ~ 0.2 | |
Y axis angle | ( ° ) | PC: -0.2 ~ 0.2 APC: 7.8 ~ 8.2 | -0.2 ~ 0.2 |
optical fiber depression | (nm) | N/A | -100 ~ 200 |
MTP Hardnedd Cable Fanout Order information
Item | Unit | Parameters |
①Connector type 1# | -- | MPO-female* , MPO-male |
② Endface 1# | -- | PC , APC |
③ Fiber count | -- | 2 , 4 , 8 , 12 & 24 MT Fiber |
④Connector type 2# | -- | MPO-female* , MPO-male , FC , SC , ST , MU , LC , E2000 |
⑤ Endface 2# | -- | PC , UPC , APC |
⑥ Fiber mode | -- | SM( OS1 , OS2 ) , MM( OM1 , OM2 , OM3 , OM4 ) |
⑦ Cable outer diameter | (mm) | Φ2 , Φ3 , Φ4 |
⑧ Length | ( M ) | L= 1 , 2 , 3 , 4 ... |
⑨ Pigtail Length | ( M ) | L1=0.5 , 0.6 , 1.0 |
⑩ Cable type | -- | RJ:Jacket Ribbon Cable , RB:Bare Ribbon Cable, |
※ For female MPO Connector, female can be committed in the ordering information
Related products
Real Picture
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.