Blue Fiber Test ST / PC Bare Fiber Optic Adapter, ST Fiber Adapter Singlemode

The optical fiber is connected through the opening sleeve inside adapter, in order to ensure the highest performance of optical fiber jumper. In order to fixed on various panel, a variety of fixed flange adapters design and manufactured.

Hybrid adapter can connected different types of fiber optic patch cord, also provide APC end face connection, duplex or multi-fiber high density installation.

Bare fiber adapter is a kind of professional auxiliary tool for optical fiber test, especially for fiber emergency repair and temporary connection.

Model: FC/PC, SC/PC,ST/PC,LC/PC available

Main characteristics:

• Low insertion loss
• Good repeatability
• Easy to use
• Length: 40MM, Diameter: 13MM
• Temperature cycle test:-40-+80 °C
• Interchangeability < 0.2dB
• Convenient operation, can be observed by the naked eye
• Reusable, single mode / multi-mode fiber can be used
• Low insertion loss,  good reflecting inhibition
• Suitable for environments requiring high transmission quality
• Precision processing, perfect docking between the adapter and the fiber end face, reducing insertion loss
• The metal shell provides good physical protection and can resist external impact and complex environment.
• Widely used in data centers, fiber optic networks, communication equipment and fiber optic testing equipment

Application:

1. Bare fiber connector device production
2. Experiment fiber test
3. Build and maintain fiber optic networks.
4. Implement fiber optic connections between routers, switches, and other devices.

How to use:

1. Strip the fiber coating layer (15-20mm) and cleaned with alcohol;

2. Press down the optical fiber adapter switch, push the fiber along the guiding hole slowly until out 

    of the ceramic ferrule (5-6mm),then relax and open ;

3. Use ruby knife delimit fiber bottom gently so as to expose part of fiber, break off the fiber.

Specification

Application scenario:

ST Fiber Optic Adapter Bare Fiber Square Type: